2000 Tiburon Junkyard Part out
07-11-2014, 07:18 PM
#13
Senior Member
Thread Starter
Join Date: May 2002
Location: tampa, FL
Posts: 1,782
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2000 Tiburon
hey Jon, going tomorrow... finally... Between work, the holiday weekend and a water main break 2 weekends ago i havent had the time to get there. Aside from the lack of requests for parts in this thread, this hasnt been a priority. The junker told me the Tib isnt going anywhere, he doesnt plan to strip it any time soon. if you need those bits that bad, you might as well head over to your picknpull.... mang. but ill get back to ya this weekend.
09-04-2014, 12:45 PM
#15
Senior Member
Thread Starter
Join Date: May 2002
Location: tampa, FL
Posts: 1,782
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2000 Tiburon
sorry this took so long. here are the pieces you requested. i did forget the motor mount grommets though... sorry. license plate lamps look dirty but are not damaged or cracked. they will clean up nice. hows does 20 bucks plus shipping. ill get ya a price by the weekend.
the steering surround is dirty but no scratches anywhere. but some sort of hardened glue on the left. might need some special sauce to get that glue off. its semi-hard, not sticky, but gummy. it should come off though.
also only 5 of those push screws. the rest were busted up. and the 3 screws for the steering surround and the hood bushings. paid 10 bucks for the surround. 20 plus shipping sound ok?
the steering surround is dirty but no scratches anywhere. but some sort of hardened glue on the left. might need some special sauce to get that glue off. its semi-hard, not sticky, but gummy. it should come off though.
also only 5 of those push screws. the rest were busted up. and the 3 screws for the steering surround and the hood bushings. paid 10 bucks for the surround. 20 plus shipping sound ok?
09-05-2014, 01:03 PM
#16
Moderator
So it won't come off with your fingernails? I'd like to be sure that it will come off without damaging the surround. My surround has the same problem. Is in good shape, but has some crazy glue I used on it that I cannot get off without damaging the surround.
Let me know.
Let me know.
09-05-2014, 07:27 PM
#17
Senior Member
Thread Starter
Join Date: May 2002
Location: tampa, FL
Posts: 1,782
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2000 Tiburon
well, sh*t... glad you made me look at it closer. after further inspection, it looks like some sort of heat stress from a chemical reaction of glue... the gummy part was just the paper that was still stuck on it. but after a gum remover you can see the plastic was deformed by the glue or epoxy. what ever the hell the glued to the underside of the dash messed up the bottom cover. the top part after a closer look is still scratch free and dent ding free. hope you dont mind me saying, i still think 20 plus shipping is a fair price for it.
