1st and 2nd Gen Tiburon Interior Vent Halo Kits
Senior Member
Joined: Sep 2002
Posts: 429
Likes: 0
bah.. screw it.. I'm in... too lazy to do all that work myself..
Matt Fulton
30238
Blue- hopefully to match most blue neon colors
Just the vent halo kit with leds and wires and all that good sh*t
[ May 03, 2003, 10:47 AM: Message edited by: BigBoi ]
Matt Fulton
30238
Blue- hopefully to match most blue neon colors
Just the vent halo kit with leds and wires and all that good sh*t
[ May 03, 2003, 10:47 AM: Message edited by: BigBoi ]
Senior Member
Joined: Aug 2001
Posts: 5,550
Likes: 0
{waves hand}
Guys ive seen them in person... they look f-ken sick
Its one those mods that make you say
"how the fvck he do that"
If i dont get some of these... ill just steal them when i finish up installing his nitrous kit
evil_gri
Guys ive seen them in person... they look f-ken sick
Its one those mods that make you say
"how the fvck he do that"
If i dont get some of these... ill just steal them when i finish up installing his nitrous kit
evil_gri
Thread Starter
http://www.hyundaiaftermarket.org/images/vendor1.png
Joined: Dec 2002
Posts: 3,237
Likes: 0
Well you Tony, and George get free kits for all the help you guys game me on my HUGE swap. So you CAN steal em, But you could also have me install a set for no charge 
UPDATE:
It rained FVCKING BALLS today so I couldn't get as far as I wanted with the video. So far I only got dash removal and disassembly. But Here is another lil sneek peak.
Old vs. New
HYBRID COLOR (just for a test I used a hollow rod)
I spent a couple hundred bux today and got some new power tools. I used em to make these molds as well.
THIS IS YOUR HALO...
THIS IS YOUR HALO ON DRUGS
More tomorrow.
[ May 03, 2003, 08:18 PM: Message edited by: BlackTIbs ]
UPDATE:
It rained FVCKING BALLS today so I couldn't get as far as I wanted with the video. So far I only got dash removal and disassembly. But Here is another lil sneek peak.
Old vs. New
HYBRID COLOR (just for a test I used a hollow rod)
I spent a couple hundred bux today and got some new power tools. I used em to make these molds as well.
THIS IS YOUR HALO...
THIS IS YOUR HALO ON DRUGS
More tomorrow.
[ May 03, 2003, 08:18 PM: Message edited by: BlackTIbs ]
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Wow, pretty good all the way down. The cuts in the halo even look pretty ... even. Are you cutting THEN bending? I'd think if you made a jig you could get them perfectly lined up on each set.
On the molds that you made, looks like the one on the right isn't round, looks oblong.
What the heasy happened to the one on drugs?
How big is the area with the electrical tape? You may want to go with heat shrink tubing here instead, would prolly look a bit nicer and be more permanant, but still take-off-able.
The Hybrid ones look awesome, we GOTS to figure a way to do the fade from blue to red for AC/Heat mang, that would look so BAAD!
On the molds that you made, looks like the one on the right isn't round, looks oblong.
What the heasy happened to the one on drugs?
How big is the area with the electrical tape? You may want to go with heat shrink tubing here instead, would prolly look a bit nicer and be more permanant, but still take-off-able.
The Hybrid ones look awesome, we GOTS to figure a way to do the fade from blue to red for AC/Heat mang, that would look so BAAD!
Thread Starter
http://www.hyundaiaftermarket.org/images/vendor1.png
Joined: Dec 2002
Posts: 3,237
Likes: 0
Definitely don't worry about the cuts in the halo. Aside from the fact that they are tucked way behind the vents. I still haven't got my little lab all done. So tomorrow I'll be spending a good 6 hours or so on that. Everything, like electrical tape, uneven cuts, mounting, all will be set up for the final kits. I already got the heat shrink, the spacing just needs a little turn table that can adjust by clicks (so say 2 or 3 clicks then cut = PERFECT CUTS). The Oblong ones are for your dash silly. Ever looked at em??? not a circle. Doors=circles
Dash=Oblong. And All kits will be supplied with 8 LEDs. My dumb *** was wrong about 4 soo... my loss. No price change. I wasn't paying attention to the "druggy halo" and it over cooked. oops... I want to hear more about that idea with the hot to cold also.
Dash=Oblong. And All kits will be supplied with 8 LEDs. My dumb *** was wrong about 4 soo... my loss. No price change. I wasn't paying attention to the "druggy halo" and it over cooked. oops... I want to hear more about that idea with the hot to cold also.
Senior Member
Joined: Aug 2001
Posts: 314
Likes: 0
It'd be like having two rheostats(dimmer switch/knob) in one unit. I think they're called variable resistors or potentiometers. I should have one lying around somewhere so I'll experiment with it. They should be relatively cheap.
Thread Starter
http://www.hyundaiaftermarket.org/images/vendor1.png
Joined: Dec 2002
Posts: 3,237
Likes: 0
UPDATE#1000000...I'm a laggin shmuck, lol
I just picked up a spare 2000 dash (I already got a 97) Cost me some cash though...
I'm in the process of finding cheaper parts but for those of you who are really interested I'll pay to get the stuff I can now. So it'll be quicker.
I GOT A SECOND GEN HEADLIGHT!!! Meaning cheaper headlight Halo's for you fellas. Hehe who wants em what color.
I gotta make a wood mold for em and that's easy as hell. Eventually I'd like to make a special cut maker... I guess that's what you'd call it. Anyway I really want to get the cuts PERFECT for you guys so it'll take some good quality work. Oh and I'll be making lights for the door handles like the guy (genius guy that is) on HA did. They'll be hooked up to the door halos and shine light in the handle. It looks awsome. I cant wait to do it to mine! But I got some packing material today. I'll post some pics of a BLUE/WHITE combo ring tonight too. It should look damn good.
Anyway I'm sorry I cant be quicker about all this. I'm sure some of you guys are anxious to get all this stuff. But this stuff will definitely be on my lil Blacktibs.com site when I make it. Just a site for my tib but I'll sell the custom stuff I've made.
I just picked up a spare 2000 dash (I already got a 97) Cost me some cash though...
I'm in the process of finding cheaper parts but for those of you who are really interested I'll pay to get the stuff I can now. So it'll be quicker.
I GOT A SECOND GEN HEADLIGHT!!! Meaning cheaper headlight Halo's for you fellas. Hehe who wants em what color.
I gotta make a wood mold for em and that's easy as hell. Eventually I'd like to make a special cut maker... I guess that's what you'd call it. Anyway I really want to get the cuts PERFECT for you guys so it'll take some good quality work. Oh and I'll be making lights for the door handles like the guy (genius guy that is) on HA did. They'll be hooked up to the door halos and shine light in the handle. It looks awsome. I cant wait to do it to mine! But I got some packing material today. I'll post some pics of a BLUE/WHITE combo ring tonight too. It should look damn good.
Anyway I'm sorry I cant be quicker about all this. I'm sure some of you guys are anxious to get all this stuff. But this stuff will definitely be on my lil Blacktibs.com site when I make it. Just a site for my tib but I'll sell the custom stuff I've made.