~fs: Ton's -o-part's!~
#1
hello everyone, been out of the tibby game for awhile, and recently sold my beta2 motor, and most of my speed parts i had for mine before the insurence agency tok it away never to be seen again. these are parts i removed, or had purchased with plans to do something to mine before the accident. if you have any questions, feel free to ask.
Custom 1 of a kind turbo heat shields- will bolt directly up to the alpine turbo manifold. $50 a piece, or $75 for the pair. very nice shape.
Fidanza aluminum flywheel- about 22K miles on it. $150
Southbend 6 puck sprung stage 3 clutch- i LOVE THIS CLUTCH! great feel, not to agressive for the daily driver. plenty of life. never even slipped. $150
J-Speed blue aluminum crank pulley- $100
RD2 two tone leather seats- Front + rear's, $200.
RD1 gray rear seats- free if you pick them up
passenger side OEM korean clear corner- no ebay junk. $25
RD2 mtx trans- good, out of a 2001 with 58k. was my spare that was getting installed with my beta2. $200
Custom Dual front strut tower bar- yup, the one i had on my car. definetly 1 of a kind. the main bar is actually a very rare old school shark racing bar. all i did was use a longer bolt, and added the 2nd lower bar. $100
Laser Etched Fuze Box Cover from Midnight wolf- brushed aluminum look. allready mounted to cover. $20
Full set of F+R rd2 floor mat's with red TIBURON logo- $25
1 RD2 OEM wheel- $40
Set of RD2 OEM tail's- comes with the foam gaskets. $40
RD2 1Big opening radio surround with ashtray- $25
Beta2 throttle body- $35
RD2 OEM rear exhaust section with flange still intact- $25
RD2 ecu- $25
OEM trunk net- $5
Ashtray- $2
Door handle Plug's- the ones that allways fall out and get lost.. $5 for a pair of them.
Maf housing- $3
Seat mount covers- little caps that cover the mounting bolts to your seats. $5 for the set
Small radiator fan- the one on the passenger side. $15
im located in Rockford, il. which is about 10 min south of wisconsin, an hour west of chicago, hour from madison, and an hour and a half from millwaukee. local pick up is not a problem and on the bigger stuff would be nice. shipping is not included. any other questions, just hit me up.
Custom 1 of a kind turbo heat shields- will bolt directly up to the alpine turbo manifold. $50 a piece, or $75 for the pair. very nice shape.
Fidanza aluminum flywheel- about 22K miles on it. $150
Southbend 6 puck sprung stage 3 clutch- i LOVE THIS CLUTCH! great feel, not to agressive for the daily driver. plenty of life. never even slipped. $150
J-Speed blue aluminum crank pulley- $100
RD2 two tone leather seats- Front + rear's, $200.
RD1 gray rear seats- free if you pick them up
passenger side OEM korean clear corner- no ebay junk. $25
RD2 mtx trans- good, out of a 2001 with 58k. was my spare that was getting installed with my beta2. $200
Custom Dual front strut tower bar- yup, the one i had on my car. definetly 1 of a kind. the main bar is actually a very rare old school shark racing bar. all i did was use a longer bolt, and added the 2nd lower bar. $100
Laser Etched Fuze Box Cover from Midnight wolf- brushed aluminum look. allready mounted to cover. $20
Full set of F+R rd2 floor mat's with red TIBURON logo- $25
1 RD2 OEM wheel- $40
Set of RD2 OEM tail's- comes with the foam gaskets. $40
RD2 1Big opening radio surround with ashtray- $25
Beta2 throttle body- $35
RD2 OEM rear exhaust section with flange still intact- $25
RD2 ecu- $25
OEM trunk net- $5
Ashtray- $2
Door handle Plug's- the ones that allways fall out and get lost.. $5 for a pair of them.
Maf housing- $3
Seat mount covers- little caps that cover the mounting bolts to your seats. $5 for the set
Small radiator fan- the one on the passenger side. $15
im located in Rockford, il. which is about 10 min south of wisconsin, an hour west of chicago, hour from madison, and an hour and a half from millwaukee. local pick up is not a problem and on the bigger stuff would be nice. shipping is not included. any other questions, just hit me up.
#8
Senior Member
Join Date: Mar 2006
Location: NAS Patuxent River, MD
Posts: 4,135
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2004 Volkswagen Jetta GLI
dibs on the dual front strut bar, oem trunk net...
is shipping included...
if not my zip code is 20670
can you post a pic of the frunt stut bar...
is shipping included...
if not my zip code is 20670
can you post a pic of the frunt stut bar...