*for Sale* 2001 Tib
Thread Starter
Senior Member
Joined: Sep 2002
Posts: 429
Likes: 0
What's up everyone... well the time has come and I have decided to sell my tib. Reason is that I just don't have the time to work on it anymore. I've started a new job and have more important priorities in my life now.
2001 Silver Tib
25,500 Miles
Automatic Tranny
Exterior:
<u>Cuda body kit </u> - rear bumper molded, sideskirts molded, front bumper is not molded. I have the foglights and rings, just never got around to installing them. CUDA emblems that were embedded in the kit are also "shaved".
<u>Other Bodywork</u> - shaved door handles w/50 lb. Autoloc door popper kit, rear windshield wiper and squirter shaved, rear spoiler shaved, rear Hyundai "H" emblem shaved, antenna shaved.
Altezza tails and front clear corners, also.
<u>Wheels and Suspension</u> - Eibach springs 1.2" drop and 17" Silver Exel TZ-7 Rims with 205/40/17 tires i believe.
<u>Interior and Engine</u>
-Interior pieces are painted with same paint as exterior and factory shifter replaced with aftermarket.
-Black/grey leather seats
-Indiglo gauges
-Pioneer cd player is old but works.. buttons get stuck once in awhile. Factory speakers replaced with Sony Xplod speakers front and rear.
-Only engine mods are custom cai and custom 2.5" "dual" exhaust (resonator with one inlet/two outlet muffler so both pipes are function for the cuda's rear bumper)
<u>3 problems that I know of</u>
- Inside of the hatch where the trim is, there is primer overspray from when I got the car repainted after all of the body work was done. Also there is a small chip in the paint on the front driver fender where the front bumper meets up with the fender.
-When i had the exhuast made, i had the OBX header installed. I decided to go back to stock header, so it left about a 1/2" gap between the header flange and the exhaust pipe flange. This can be fixed easily at a shop or if you have a welder by adding an exhaust pipe sleeve like the ones found at part stores.
-The inside plastic lining/mud-water guard of the front passenger side wheel well needs to be replaced. I forgot to screw it back down and it hit the wheel and shredded.
I think I remembered everything. As you can see, most of the work was done to the exterior. I have alot of money put into the car and I hate to see it go, but life goes on.
I am asking $9,500. Email me at fulton.matt@gmail.com , reply here, PM me, or message me BigBoi2863 on AIM if interested.
2001 Silver Tib
25,500 Miles
Automatic Tranny
Exterior:
<u>Cuda body kit </u> - rear bumper molded, sideskirts molded, front bumper is not molded. I have the foglights and rings, just never got around to installing them. CUDA emblems that were embedded in the kit are also "shaved".
<u>Other Bodywork</u> - shaved door handles w/50 lb. Autoloc door popper kit, rear windshield wiper and squirter shaved, rear spoiler shaved, rear Hyundai "H" emblem shaved, antenna shaved.
Altezza tails and front clear corners, also.
<u>Wheels and Suspension</u> - Eibach springs 1.2" drop and 17" Silver Exel TZ-7 Rims with 205/40/17 tires i believe.
<u>Interior and Engine</u>
-Interior pieces are painted with same paint as exterior and factory shifter replaced with aftermarket.
-Black/grey leather seats
-Indiglo gauges
-Pioneer cd player is old but works.. buttons get stuck once in awhile. Factory speakers replaced with Sony Xplod speakers front and rear.
-Only engine mods are custom cai and custom 2.5" "dual" exhaust (resonator with one inlet/two outlet muffler so both pipes are function for the cuda's rear bumper)
<u>3 problems that I know of</u>
- Inside of the hatch where the trim is, there is primer overspray from when I got the car repainted after all of the body work was done. Also there is a small chip in the paint on the front driver fender where the front bumper meets up with the fender.
-When i had the exhuast made, i had the OBX header installed. I decided to go back to stock header, so it left about a 1/2" gap between the header flange and the exhaust pipe flange. This can be fixed easily at a shop or if you have a welder by adding an exhaust pipe sleeve like the ones found at part stores.
-The inside plastic lining/mud-water guard of the front passenger side wheel well needs to be replaced. I forgot to screw it back down and it hit the wheel and shredded.
I think I remembered everything. As you can see, most of the work was done to the exterior. I have alot of money put into the car and I hate to see it go, but life goes on.
I am asking $9,500. Email me at fulton.matt@gmail.com , reply here, PM me, or message me BigBoi2863 on AIM if interested.
Administrator
Joined: Oct 2002
Posts: 13,943
Likes: 0
From: ɯooɹpǝq ɹnoʎ
Vehicle: ǝdnoɔ sısǝuǝƃ
I'm sorry to hear you're selling. I've been hoping you'd get your trunk set up done and to see you at NOPI this summer. The car looks amazing, and I hope it finds a suitable home.
As far as the plastic fender well lining, just remove it. You can do it without removing the wheel I believe. It has a bunch of those plastic push-screws in there. You can almost just pull them out. I removed the front fender linings on mine
Good luck dude, but I really hope to see you driving it in September to NOPI Nats
As far as the plastic fender well lining, just remove it. You can do it without removing the wheel I believe. It has a bunch of those plastic push-screws in there. You can almost just pull them out. I removed the front fender linings on mine
Good luck dude, but I really hope to see you driving it in September to NOPI Nats
Thread Starter
Senior Member
Joined: Sep 2002
Posts: 429
Likes: 0
Thanks.. it is nice and I think the price is nice too... value on it is $8400 stock with the 25K Miles... let alone the wheels, kit, springs, body work and complete repaint... and the other little extras
Senior Member
Joined: Dec 2002
Posts: 1,064
Likes: 0
Yeah, this is a KILLER deal and Matt is a great guy!! I was hoping to see the hatch finished too, the plans and the fiber were coming along so well.
I know what you are going through with selling it. It was really hard for me not to buy another one when mine was totaled but I reached a point in my life that it just wasn't feasible, too many other things going on.
Free bump and someone give this car a good home!!
I know what you are going through with selling it. It was really hard for me not to buy another one when mine was totaled but I reached a point in my life that it just wasn't feasible, too many other things going on.
Free bump and someone give this car a good home!!
Senior Member
Joined: Jun 2002
Posts: 1,137
Likes: 0
From: Binghamton, NY
oh man... this is one of my favorite cudas... I've had these pics rotating in my picture screensaver for what seems like years. 02.gif good luck man. 25,000 miles is killer... make sure to tuck an RDT business card in the glove box for whoever buys it!