Pretty good results from today's racing :)
#1
Pretty good results from today's racing :)
Got the track and it was starting to rain a tiny bit. After the 1st run, which was the best, track started getting very slippery, and I could not floor my car in 1st at all....
So the 1st run was right off the road, drove about 40mi(hot engine bay) and I had 36psi pressure on my front tires.
My mods are 4-2-1 header, motoria exhaust, home made CAI, R-side STS, and about 80lbs of weight reduction.
R/T........................ 0.726 (don't really care about it)
60'......................... 2.332 (horrible! I've had 2.26 before with less mods)
330........................ 6.477
1/8........................ 9.892
MPH....................... 72.57
1000...................... 12.811
1/4........................ 15.305
MPH....................... 90.70
With good traction that I will get on a dry track I can definitely pull 15.1 for sure. I'm also gonna try to wrap my headers and put some stuff on CAI to reflect the heat, and that should bring me to 14s. I also had 1/3 tank of gas, it's extra 25lbs or so.
Stay tuned for updates and wish me luck getting into 14s smile.gif
So the 1st run was right off the road, drove about 40mi(hot engine bay) and I had 36psi pressure on my front tires.
My mods are 4-2-1 header, motoria exhaust, home made CAI, R-side STS, and about 80lbs of weight reduction.
R/T........................ 0.726 (don't really care about it)
60'......................... 2.332 (horrible! I've had 2.26 before with less mods)
330........................ 6.477
1/8........................ 9.892
MPH....................... 72.57
1000...................... 12.811
1/4........................ 15.305
MPH....................... 90.70
With good traction that I will get on a dry track I can definitely pull 15.1 for sure. I'm also gonna try to wrap my headers and put some stuff on CAI to reflect the heat, and that should bring me to 14s. I also had 1/3 tank of gas, it's extra 25lbs or so.
Stay tuned for updates and wish me luck getting into 14s smile.gif
#2
Senior Member
Join Date: Mar 2006
Location: Tampa/St Petersburg
Posts: 4,334
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Turbocharged 2001 Hyundai Tiburon
nice job man, good N/A numbers! weather is looking up around here so its only a matter of time for me! yay :-D
#4
Senior Member
Join Date: May 2006
Posts: 4,722
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon
Yep, its getting to be that time of year again. Can't wait to get the vehicles to the track for a little fun. Now I gotta buy me some performancey stuff.
#5
<div class='quotetop'>QUOTE (mb1604)</div><div class='quotemain'>thats pretty good, i should be around there, low 15's high 14's in spring, : ) cant wait, its gonna be 60 here this week, first time in like 4 months lol</div>
Good luck to you man. I can't wait for it to get warm again and stop raining!!!
<div class='quotetop'>QUOTE </div><div class='quotemain'>nice job man, good N/A numbers! weather is looking up around here so its only a matter of time for me! yay :-D</div>
Thanks man smile.gif
Ham, what did you run on your tib?
Good luck to you man. I can't wait for it to get warm again and stop raining!!!
<div class='quotetop'>QUOTE </div><div class='quotemain'>nice job man, good N/A numbers! weather is looking up around here so its only a matter of time for me! yay :-D</div>
Thanks man smile.gif
Ham, what did you run on your tib?
#6
Senior Member
Join Date: May 2006
Posts: 4,722
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon
15.5 with I/E. I really need to get out with these new tires. I really wanted to buy a header around this time, but good old KSpec bumped up the prices so I'm hesitant now.
#10
Thanks guys.
Ham, good stuff with that I/E smile.gif Keep up the good work smile.gif
Importshark, you plan on getting into 13s N/A? It would be a little difficult, but possible IMO. I know you have a turbo kit, that should be no problem then. Lets hope that you won't have to sell everything out.
Next mods will be: BBTB, clutch + flywheel, pulleys. Also, I got a spare IM, I opened up the TB hole to 61mm already, as well as I ported somewhat the runners, gotta finish them up. Getting a heat spacer for IM as well to keep it very cool smile.gif
Wrap my headers, wrap my CAI. and then comes the funnest part..... my wet NX kit smile.gif
Hopefully all N/A I will reach 14.5-14.4, then with nitrous it would be nice be somewhere in mid 13s smile.gif I think 90 shot will bring me there smile.gif
Ham, good stuff with that I/E smile.gif Keep up the good work smile.gif
Importshark, you plan on getting into 13s N/A? It would be a little difficult, but possible IMO. I know you have a turbo kit, that should be no problem then. Lets hope that you won't have to sell everything out.
Next mods will be: BBTB, clutch + flywheel, pulleys. Also, I got a spare IM, I opened up the TB hole to 61mm already, as well as I ported somewhat the runners, gotta finish them up. Getting a heat spacer for IM as well to keep it very cool smile.gif
Wrap my headers, wrap my CAI. and then comes the funnest part..... my wet NX kit smile.gif
Hopefully all N/A I will reach 14.5-14.4, then with nitrous it would be nice be somewhere in mid 13s smile.gif I think 90 shot will bring me there smile.gif