I recently purchased a NX Wet System. I have the bottle mounted on the right side of my trunk with the nozzle towards the front like directed. I have the main nitrous line running along the right side through the interior. Where should I exit the vehicle with the line? Also, where should I mount the solenoids? I have a Nitrous, Fuel, and Purge solenoid. If you could post pics of your setup that would be awesome!

 

I wouldn't run it IN your car. I ran mine out the wheel well and along the rail where the fuel lines go. I ziptied the line to them. I then brought the line up between the firewall and the shock tower. I mounted one solenoid there, and the other on the firewall.

 

here you go hahahaha

 

http://www.rdtiburon.com/index.php?name=Fo...viewtopic&t=547
there ya go.... java

 

Dweet, can you edit that post to just the link for your post in the DIY section?

 

Wow! That's just about everything I needed. One question though, did you drill a hole through the firewall, or use an existing one. The only one I know if is directly behind the IM and it is packed with wires already.

 

there is supposed to be a huge opening to the left of the clutch pedal between the passenger compartment and the fenderwell.

 

The one with a bunch of wires is your wiring harness... Id stay away from that one. I drilled the hole myself. Im not scared of putting holes in the firewall. I had to drill another hole for my 4ga stereo wire