Whats Up Everyone! I'm New To The Forum!
Thread Starter
Junior Member
Joined: Aug 2007
Posts: 2
Likes: 0
From: Oakland,Ca.
Hi, my name is Arnold. I'm from the Bay Area (Oakland, Ca.) P.S. I've been Hidding out for sometime!
My ride: 1998 Tiburon 2.0L Auto (Soon to be manual in a month)
N/A Engine Mods:
1.SR-BBTB
2.AEM-CAI
3.Remapped ECU (Rev Limit 8400rpm/MSD set for 7500rpm rev limit)
4.Apexi-SafcII
5.MSD-Dis 4 (Rev Limit set at 7500)
6.Intake/Exhaust Camshaft (264 Degree Duration)
7.Nology Hotwire Plugs
8.NGK Iridium spark plugs
9.BB-Stock intake manifold plus runners (polished)
10.Hondata intake manifold heat Gasket
11.OBX Crank Pully(no AC or Powersteering units)
12.Transmission Cooler and Oil Cooler
13.SR-Tranny and motor mounts
14.Ground Wire Kit
15.O2 sensor Eliminator (No Cat/Test pipe only)
16.4-2-1 Headers
17.2-1/2in Mandrell bent custom Dual Exhaust w/2 OBX Round 4" tip Mufflers
18.Exhaust-HI Temp Coated and Thermo Heat Rapped from headers too mufflers
19.AFR gauge/Oil Temp gauge/Transmission Temp gauge
Exterior: 1st Gen. Cuda Kit w/ Cuda spoiler
1.SR-Chrome Door Handles
2.17in Rims Aluminum polished
3.Sloted Rotors
Interior:
!. Upgraded Stereo System
2. Stock interior all black
P.S. I will soon put up pictures of my ride!
My ride: 1998 Tiburon 2.0L Auto (Soon to be manual in a month)
N/A Engine Mods:
1.SR-BBTB
2.AEM-CAI
3.Remapped ECU (Rev Limit 8400rpm/MSD set for 7500rpm rev limit)
4.Apexi-SafcII
5.MSD-Dis 4 (Rev Limit set at 7500)
6.Intake/Exhaust Camshaft (264 Degree Duration)
7.Nology Hotwire Plugs
8.NGK Iridium spark plugs
9.BB-Stock intake manifold plus runners (polished)
10.Hondata intake manifold heat Gasket
11.OBX Crank Pully(no AC or Powersteering units)
12.Transmission Cooler and Oil Cooler
13.SR-Tranny and motor mounts
14.Ground Wire Kit
15.O2 sensor Eliminator (No Cat/Test pipe only)
16.4-2-1 Headers
17.2-1/2in Mandrell bent custom Dual Exhaust w/2 OBX Round 4" tip Mufflers
18.Exhaust-HI Temp Coated and Thermo Heat Rapped from headers too mufflers
19.AFR gauge/Oil Temp gauge/Transmission Temp gauge
Exterior: 1st Gen. Cuda Kit w/ Cuda spoiler
1.SR-Chrome Door Handles
2.17in Rims Aluminum polished
3.Sloted Rotors
Interior:
!. Upgraded Stereo System
2. Stock interior all black
P.S. I will soon put up pictures of my ride!
Senior Member
Joined: Jul 2004
Posts: 5,155
Likes: 0
From: Eau Claire, WI
Vehicle: 97 Tib
How'd you find us?
Can't wait for the pics!
BTW, that must be one LOUD exhaust....you should consider getting a cat put on at least, we like to breathe cleaner air tongue.gif
Welcome to the site!
Can't wait for the pics!
BTW, that must be one LOUD exhaust....you should consider getting a cat put on at least, we like to breathe cleaner air tongue.gif
Welcome to the site!
