Old Member... New Poster (introduction
03-31-2008, 11:55 PM
#1
Member
Thread Starter
Join Date: Jan 2005
Location: Lexington, SC
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Hi, my name is Matthew (coal_forge from hyundaiperformance/honda-tech
I'm from Lexington South Carolina.
I drive a 2000 Hyundai tiburon.
I found these forums a long time ago, but some crazy stuff happend with passwords and I was unable to post, so I left this forum be only to return.
I've done the following mods to my car.
Header, 2.25" exhaust (switching back to 2&3/8" side exit), homemade short shifter, completly gutted except for cutting out metal panels, act 6 puc unsprung clutch with a heafty pressure plate, welded in strut tower bars, 1.8 intake cam, eibach springs with kyb struts, rolled on rustolem paint job, removed power steering/ac, removed clutch fluid restrictor plate, urathane filled engine mounts, cai, odyessey pc680, and I know I am forgetting stuff.
The future and present:
itb project underway, needs to be lowered again thanks to massive weight reduction, roof scoop/vent for positive ventilation and cooling air, recycling the air conditioning evaporater into an engine oil cooler, and melting down old fidanza flywheel and using it to fill engine mounts.
It's good to meet you all and I hope to share with you!
I'm from Lexington South Carolina.
I drive a 2000 Hyundai tiburon.
I found these forums a long time ago, but some crazy stuff happend with passwords and I was unable to post, so I left this forum be only to return.
I've done the following mods to my car.
Header, 2.25" exhaust (switching back to 2&3/8" side exit), homemade short shifter, completly gutted except for cutting out metal panels, act 6 puc unsprung clutch with a heafty pressure plate, welded in strut tower bars, 1.8 intake cam, eibach springs with kyb struts, rolled on rustolem paint job, removed power steering/ac, removed clutch fluid restrictor plate, urathane filled engine mounts, cai, odyessey pc680, and I know I am forgetting stuff.
The future and present:
itb project underway, needs to be lowered again thanks to massive weight reduction, roof scoop/vent for positive ventilation and cooling air, recycling the air conditioning evaporater into an engine oil cooler, and melting down old fidanza flywheel and using it to fill engine mounts.
It's good to meet you all and I hope to share with you!
04-01-2008, 12:55 AM
#4
Member
Thread Starter
Join Date: Jan 2005
Location: Lexington, SC
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
All i got is some old photos from dec07. A lot has changes with my car since then.
Waiting on paint to dry. I will be adding white to the paint because I am tired of all the comments about the army and such.
http://s129.photobucket.com/albums/p231/Co...rent=front1.jpg
Old engine bay pic after welding in homemade strut bar.
http://s129.photobucket.com/albums/p231/Co...nt=100_2055.jpg
Fidanza flywheel failure
http://s129.photobucket.com/albums/p231/Co...nt=P1010438.jpg
http://s129.photobucket.com/albums/p231/Co...nt=P1010473.jpg
My camera is broken. Some pictures are rather large so i used url.
My Myspace
adress is myspace.com/hyundai
Waiting on paint to dry. I will be adding white to the paint because I am tired of all the comments about the army and such.
http://s129.photobucket.com/albums/p231/Co...rent=front1.jpg
Old engine bay pic after welding in homemade strut bar.
http://s129.photobucket.com/albums/p231/Co...nt=100_2055.jpg
Fidanza flywheel failure
http://s129.photobucket.com/albums/p231/Co...nt=P1010438.jpg
http://s129.photobucket.com/albums/p231/Co...nt=P1010473.jpg
My camera is broken. Some pictures are rather large so i used url.
My Myspace
adress is myspace.com/hyundai
04-17-2008, 06:06 PM
#6
Junior Member
Join Date: Feb 2005
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Hi, my name is Nelson. I'm from Canada. I drive a Tiburon 2000, a Corolla 1998 and a dodge Challenger 1970.
I found these forums a very long time a ego but I never post before.
I've done the following mods to my car:
XD cam
CAI
Bored TB
It's a really nice group, I hope a will keep learning from you
04-22-2008, 04:27 PM
#8
Moderator
Nel, I'm glad you finally posted. I've seen your name in grey for about 3 years now and decided that I needed to send you a message. Good to see you as an active member now.
