My Re- Introduction
Thread Starter
Senior Member
Joined: Jul 2010
Posts: 1,721
Likes: 0
Vehicle: 05 Subaru WRX
Well i figured REDZMAN would harass me about this a few more times, so here we go.
HI! I am A.J. I Live in Los Lunas N.M.
I started loving Hyundai a long time ago. I purchased my first Hyundai, a 1999 elantra in 2001 and have been stuck ever since. I fabbed up a C.A.I. for it and had an exhaust put on, but then I totalled it in early 2003. Joined the Air Force that year. After almost a year of tech school purchased a 2004 elantra and that is where this sickness continued. Still own the 04, but let's talk about the Tib now. I purchasd a 1997 Tiburon fx in late 2004 and drove the piss out of it. Threw an axle out of the trans while back home on leave and it sat there for almost a year. REDZMAN purchased the vehicle from me at that point and trailerd it back to N.M.. He was able to get a few months of driving out of her before the original electrical problem cam back and she was undrivable. The tib then sat for almost another year, Then I re-purchased it. It sat in REDZMAN's garage for a week or so while I put her back together and troubleshot the electrical problem. I Finaly found the electrical problem, the E.C.U. harness on Rev-A Tibs runs right behind the the gas pedal swing arm. After many years of abuse, the swing arm had cut into three wires. It cut into the CKP, IAC and AC wires. Since fixing that she ran beatiful... that is until the trans blew up. Now on to current status she is in the garage with a new to her trans to go on today. A new clutch is already on.. Pics will be up later today, Just waiting on REDZMAN to show up so we can put the trans on and get her moving again.
MODS
CAI
60mm big bore throttle body (purple like tibbychick's)
port and polished intake manifold
port and polishid head with all new components
GT Intake cam
1.8 ECU
fidanza flywheel
Light weight pully set from jspeed (all three of em)
currently ngk wires... sooon to be prd
Beta2 valve cover
Pivot Raizen...Well waiting to go in
I believe it is the ark short throw shifter(I will ask REDZMAN)
eibach springs
kyb-gr2 struts
front strut bar
17x7 rims
khumo ecsta 711 tires
Evo front bumper (Some one wants this i will sell it soon. I am just waiting on my new arrival)
Clifford alarm
Sony head unit
Audiobahns for 6x9's and in the doors
I think that should be it, REDZMAN will tell me if I missed someting.
HI! I am A.J. I Live in Los Lunas N.M.
I started loving Hyundai a long time ago. I purchased my first Hyundai, a 1999 elantra in 2001 and have been stuck ever since. I fabbed up a C.A.I. for it and had an exhaust put on, but then I totalled it in early 2003. Joined the Air Force that year. After almost a year of tech school purchased a 2004 elantra and that is where this sickness continued. Still own the 04, but let's talk about the Tib now. I purchasd a 1997 Tiburon fx in late 2004 and drove the piss out of it. Threw an axle out of the trans while back home on leave and it sat there for almost a year. REDZMAN purchased the vehicle from me at that point and trailerd it back to N.M.. He was able to get a few months of driving out of her before the original electrical problem cam back and she was undrivable. The tib then sat for almost another year, Then I re-purchased it. It sat in REDZMAN's garage for a week or so while I put her back together and troubleshot the electrical problem. I Finaly found the electrical problem, the E.C.U. harness on Rev-A Tibs runs right behind the the gas pedal swing arm. After many years of abuse, the swing arm had cut into three wires. It cut into the CKP, IAC and AC wires. Since fixing that she ran beatiful... that is until the trans blew up. Now on to current status she is in the garage with a new to her trans to go on today. A new clutch is already on.. Pics will be up later today, Just waiting on REDZMAN to show up so we can put the trans on and get her moving again.
MODS
CAI
60mm big bore throttle body (purple like tibbychick's)
port and polished intake manifold
port and polishid head with all new components
GT Intake cam
1.8 ECU
fidanza flywheel
Light weight pully set from jspeed (all three of em)
currently ngk wires... sooon to be prd
Beta2 valve cover
Pivot Raizen...Well waiting to go in
I believe it is the ark short throw shifter(I will ask REDZMAN)
eibach springs
kyb-gr2 struts
front strut bar
17x7 rims
khumo ecsta 711 tires
Evo front bumper (Some one wants this i will sell it soon. I am just waiting on my new arrival)
Clifford alarm
Sony head unit
Audiobahns for 6x9's and in the doors
I think that should be it, REDZMAN will tell me if I missed someting.
