Intro
Thread Starter
Junior Member
Joined: Dec 2006
Posts: 26
Likes: 0
Hi everyone,
I think I may have posted an introduction in the past...(i could be wrong) but RedZMan said for me to post another one, so here it goes!
I have a 2001 Tiburon...dark blue. I am just getting started in learning how to take care of it and fix it. I have been a long-standing member over at sr20forum.com and joined when I had an NX2000. Sadly, I wrecked it aobut 3 years ago and bought this car in its place.
So far I have been very appreciative of this forum because of all the tutorials and DIY section. I am confident that this place will prove to be a valuable resource for me in the near future, and I look forward to years of reading and posting here.
I have a few plans for the car. I am searching for a 1.8L intake cam, will be buying headers, am having a custom cat-back exhaust made for me, and have a cool Dynomax muffler that I found at a junkyard this weekend! I also am getting new belts, water pump and tensioner pulley for this weekend.
I'm also intrigued by those air-vent blue angel-eye LED's that I saw in another thread.
Ok, well, that's my intro. Hope you enjoy it.
Steve a.k.a. JokerGrin
(myspace . com/ jokergrin)
I think I may have posted an introduction in the past...(i could be wrong) but RedZMan said for me to post another one, so here it goes!
I have a 2001 Tiburon...dark blue. I am just getting started in learning how to take care of it and fix it. I have been a long-standing member over at sr20forum.com and joined when I had an NX2000. Sadly, I wrecked it aobut 3 years ago and bought this car in its place.
So far I have been very appreciative of this forum because of all the tutorials and DIY section. I am confident that this place will prove to be a valuable resource for me in the near future, and I look forward to years of reading and posting here.
I have a few plans for the car. I am searching for a 1.8L intake cam, will be buying headers, am having a custom cat-back exhaust made for me, and have a cool Dynomax muffler that I found at a junkyard this weekend! I also am getting new belts, water pump and tensioner pulley for this weekend.
I'm also intrigued by those air-vent blue angel-eye LED's that I saw in another thread.
Ok, well, that's my intro. Hope you enjoy it.
Steve a.k.a. JokerGrin
(myspace . com/ jokergrin)
Senior Member
Joined: Mar 2006
Posts: 1,272
Likes: 0
Vehicle: 1997/ Hyundai/ Tiburon
welcome.
there are alot of info on the forum itself (thanks mods for keeping them clean),
so u can find alot of stuff searching. but on the other hand, resposes to questions
not already on the forum are very quick.
were a close knit community, and welcome u here.
there are alot of info on the forum itself (thanks mods for keeping them clean),
so u can find alot of stuff searching. but on the other hand, resposes to questions
not already on the forum are very quick.
were a close knit community, and welcome u here.
Senior Member
Joined: Oct 2003
Posts: 228
Likes: 0
From: Hill AFB, UT
<div class='quotetop'>QUOTE (rd1tib @ Dec 18 2006, 12:46 PM) <{POST_SNAPBACK}></div><div class='quotemain'>were a close knit community, and welcome u here.</div>
Yeah, I've been gone for over 2 years and still feel welcome so...Welcome to the boards I guess. You should have fun here and it's pretty informative.
Yeah, I've been gone for over 2 years and still feel welcome so...Welcome to the boards I guess. You should have fun here and it's pretty informative.
Senior Member
Joined: Nov 2008
Posts: 2,881
Likes: 0
From: Huntsville, AL
Vehicle: 2001/Hyundai/Tiburon
Welcome to the site mang!!
Post up some pics when you get a chance!
I'm the guy that makes the vent angel eyes, check out my thread here.
PM me if you interested! Don't mean to hijack your thread....
And paying that much for a 1.8L cam is a ripoff, unless it has better timing than a normal 1.8L cam. Theres guys on here that can get them for about $70ish from a junkyard... How much was the underdrive pulley though? nvm, I'll search...
Welcome!
Post up some pics when you get a chance!
I'm the guy that makes the vent angel eyes, check out my thread here.
PM me if you interested! Don't mean to hijack your thread....
And paying that much for a 1.8L cam is a ripoff, unless it has better timing than a normal 1.8L cam. Theres guys on here that can get them for about $70ish from a junkyard... How much was the underdrive pulley though? nvm, I'll search...
Welcome!
Senior Member
Joined: Aug 2009
Posts: 11,992
Likes: 0
From: Washington D.C.
Vehicle: Hyundai Tiburon FX
what's up? welcome to rd tiburon. sorry to hear about your wreck, but happinness has no end at rdtiburon.
hope you find what you need, and definitely stick around. any pics?
hope you find what you need, and definitely stick around. any pics?