I can't seem to get any to work for me here. I want to print of the DIY for the mirror and the images will not come on for me. they show up as IMG link /IMG in brackets of course. It doesn't work anywhere one the site. I tried changing the setting on my board setting but it was already set properly I changed it back and forth and hoped it would work but nothing. A little help guys.

I'm trying to figure it out. Sometimes just editing and saving the thread makes all images appear. Go ahead and post your DIY in the Testing forum, and copy/paste the entire thread into Notepad and save it as a txt file for the time-being. If we can mess with it and make it work in the Testing forum, we'll move it to the proper topic.

go ahead and post it, and PM me with a link. i'll see what I can do about making the images show up

https://www.mikekemper.com/forum/pizza.jpg

A little test...

I don't know why.... I've hear a lot of people having problems and I haven't had any. :unsure:

^ The problem is not posting pictures, it is image codes aren't recognized since the conversion (any posts prior to the conversion to the new software).

It's been posted about several times and is being worked on. Look at the NEW SOFTWARE post in the Suggestions forum.