Herro
#1
Junior Member
Thread Starter
Join Date: Aug 2010
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2008 Tiburon
Herro
Hi!
New to the forum, not new to the scene.
I've went many different ways with my car.. I go to HPDE/OTD's with the car quite frequently so my car is Function > form.
Modifications
Engine
Injen CAI
Borla catback
SSA headers
Duffer ported Stg 3 UIM
Grimmspeed ported LIM
Custom ported TB, soon to upgrade to 70mm NGM Billet TB along with a stg 4 UIM.
Stage 2 NGM heads
Suspension
HSD coilovers
VPW endlinks
Kosei K1 TS wheels in 17 x 8" all over
Wilwood BBK
UR rear sway bar (just gotta pay even for it )
No interior mods.. not into that flashy thing.. I do have an oil pressure, aem uego, in the double din, and an F/IC sitting on the floor
Future mods
Looking for a set of used F/I cams
re-porting my heads, using NGM valves, springs, and titanium retainers.
6-spd LSD/Nissan FD
Single or dual turbo setup..
Few pics
New to the forum, not new to the scene.
I've went many different ways with my car.. I go to HPDE/OTD's with the car quite frequently so my car is Function > form.
Modifications
Engine
Injen CAI
Borla catback
SSA headers
Duffer ported Stg 3 UIM
Grimmspeed ported LIM
Custom ported TB, soon to upgrade to 70mm NGM Billet TB along with a stg 4 UIM.
Stage 2 NGM heads
Suspension
HSD coilovers
VPW endlinks
Kosei K1 TS wheels in 17 x 8" all over
Wilwood BBK
UR rear sway bar (just gotta pay even for it )
No interior mods.. not into that flashy thing.. I do have an oil pressure, aem uego, in the double din, and an F/IC sitting on the floor
Future mods
Looking for a set of used F/I cams
re-porting my heads, using NGM valves, springs, and titanium retainers.
6-spd LSD/Nissan FD
Single or dual turbo setup..
Few pics
#4
Junior Member
Thread Starter
Join Date: Aug 2010
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2008 Tiburon
I'm from Michigan.
I'll have new pics up within the next week or so.. I went to put my coilovers on last Friday and there's a damn bolt that's seized on the strut. Impact, breaker, and all my muscles weren't able to break it loose. I gotta take it to a shop and have it torched out.
In the pics that i've posted.. I have CM springs, 1.8" drop all around. Painted F/L2 wheels, and stock brakes.
Coilovers, Kosei's, and my wilwoods should be installed by Friday if nothing goes wrong.
I got the Kosei's because the stock wheels wouldn't allow the wilwoods to fit. Not really a fan of aftermarket wheels, but if they serve a purpose, like being able to run larger brakes.. i'm all for functionality. It doesn't hurt that the wheels are 15.4lbs ea. haha
I'll have new pics up within the next week or so.. I went to put my coilovers on last Friday and there's a damn bolt that's seized on the strut. Impact, breaker, and all my muscles weren't able to break it loose. I gotta take it to a shop and have it torched out.
In the pics that i've posted.. I have CM springs, 1.8" drop all around. Painted F/L2 wheels, and stock brakes.
Coilovers, Kosei's, and my wilwoods should be installed by Friday if nothing goes wrong.
I got the Kosei's because the stock wheels wouldn't allow the wilwoods to fit. Not really a fan of aftermarket wheels, but if they serve a purpose, like being able to run larger brakes.. i'm all for functionality. It doesn't hurt that the wheels are 15.4lbs ea. haha
#6
Junior Member
Thread Starter
Join Date: Aug 2010
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2008 Tiburon
http://www.youtube.com/watch?v=ZvzzM-guw8s
Me at Grattan raceway.
First car I passed was a Saturn.. Astra? The second was a Kia Forte, third was an MR2. After I pass the MR2 the car started to overheat on the straight, I pulled off.
Me at Grattan raceway.
First car I passed was a Saturn.. Astra? The second was a Kia Forte, third was an MR2. After I pass the MR2 the car started to overheat on the straight, I pulled off.