Interior, Sound, Security Modifications to the Interior of your Hyundai. Seats, Carpet, Car Audio & Entertainment, interior painting, security, etc..

light dimmer

Old Jul 11, 2011 | 01:50 PM
  #1  
tibby01's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2001
Posts: 110
Likes: 0
From: Little Rock
Vehicle: 2001 Tiburon
Default light dimmer

If you switch all your interior lights to a different color LED (blue), does your light dimmer (the roller thingy on the dash) still work? I never use that thing anyway but i was curious about it.
Reply
Old Jul 11, 2011 | 07:34 PM
  #2  
red97tib's Avatar
Senior Member
 
Joined: Jan 2009
Posts: 428
Likes: 0
From: Iowa
Vehicle: 1997/Hyundai/Tiburon
Default

I have LED's in my dash. They turn down slightly and then just turn off. So basically no the roller switch doesn't do anything except click them off.
Reply
Old Jul 11, 2011 | 10:22 PM
  #3  
Stocker's Avatar
Super Moderator
 
Joined: Sep 2001
Posts: 10,795
Likes: 5
From: Pflugerville, TX
Vehicle: 2000 Elantra
Default

The dimmer works, but has no more practical effect. LEDs you would want to pay for won't dim very well like regular bulbs can



LEDs work differently to incandescents. There is a narrow voltage range where they will work, whereas an incandescent bulb will just glow dimmer until there is not enough voltage to keep them hot enough to glow (this is also why LEDs won't drain your battery totally flat like a regular bulb left on). IF you had some LEDs that had a voltage controlled current regulator, you could dim them to an extent. If your LEDs are just lined up in series with maybe a limiting resistor, you get almost-no dimming compared to incandescent lamps.
Reply
Old Jul 12, 2011 | 06:42 AM
  #4  
StrikeEagle's Avatar
Senior Member
 
Joined: Nov 2008
Posts: 2,881
Likes: 0
From: Huntsville, AL
Vehicle: 2001/Hyundai/Tiburon
Default

Yes the dimmer still works. But barely. I have almost only LEDs in my dash, and they dim just a tiny little bit when moving the dimmer roller. With regular bulbs, moving the roller from min to max makes it go from like 1 to 10. With LEDs, that 1 to 10 is more like a 9 to 10. Very minimal.
Reply



All times are GMT -6. The time now is 10:56 PM.