Handbrake (e-brake) handle
Thread Starter
Senior Member
Joined: May 2001
Posts: 585
Likes: 0
Vehicle: Mitsubishi Lancer Ralliart GSR
Handbrake (e-brake) handle
Has anyone replaced their handbrake handle with an aftermarket one?
I've had a look around and all I can find are these.
Is there anything nicer out there, that actually fits the tib?
TIA
Zoe
I've had a look around and all I can find are these.
Is there anything nicer out there, that actually fits the tib?
TIA
Zoe
Administrator
Joined: May 2001
Posts: 23,226
Likes: 9
From: Upstate NY
Vehicle: 2010 Genesis 2.0T
Zoe..this what I have in red:
E-Brake Handle
Don't know where else you might be able to find one that fits, but these are pretty decent.
Good luck!
L8TR..........
E-Brake Handle
Don't know where else you might be able to find one that fits, but these are pretty decent.
Good luck!L8TR..........
Senior Member
Joined: May 2001
Posts: 854
Likes: 0
I changed the brake handle here is what I did. First I cut the rubber handle with a razor blade yes cut. Second ripped it off. Third the handle i bought the opening of the handle was to small so I had to dremel it out and then it slid on (bore to 3/25's of an inch) maybe a little bigger and then I just bolted it on and boom all done if you need a better explination just let me know I can't go into to much detail I'm at work and I should be working lol smile.gif
Senior Member
Joined: May 2001
Posts: 166
Likes: 0
AC Rave Style
AC R - Style
AC MX - Style
Tenzo R
HondaSport
www.import-concepts.com 
www.import-concepts.com
