Ebay Sub Box (trunk Enclosure)
#1
Senior Member
Thread Starter
Join Date: Mar 2006
Posts: 7,799
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon
Ive been looking at this for a while. Does anyone have a setup from this seller? I need a way to mount my three 10's and this seems nice. I wanted to have something in FG that sits flush with the top of the trunk but I think this will do as I dont have time to make it or money to have it done. Any opinions?
ebay trunk enclosure
ebay trunk enclosure
#2
Senior Member
Join Date: Sep 2008
Location: South Dakota
Posts: 786
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2000/Hyundai/Tiburon
i do not know of anyone with one in their tib from this guy, but i do know of a person with a concorde who i believe got one of these from that store and it fit perfectly, and also know of a guy with a stealth who has an ebay one for 3 10's that fits pefect also, i do not know what store he got it from either however
#4
Senior Member
Join Date: Mar 2006
Location: Columbus, Ohio
Posts: 3,285
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2000 tiburon
pretty sure my buddy with a GK has one made by him and its pretty nice. he wins alot of shows with it and the box hits pretty hard for what he has going on
#5
Senior Member
I think it looks nice. fing02.gif Only drawback I can see is you will pretty much have NO access to the spare tire. But if you are ok with that, it looks very clean. Definitely my kind of taste.
#6
Senior Member
Join Date: Mar 2006
Location: Columbus, Ohio
Posts: 3,285
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2000 tiburon
the sides fold up and you can lift the whole box out with out TOOO much trouble. you can also get under there for adjustments if you mount your crossover under there too.
#7
Senior Member
Join Date: Mar 2006
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1998 Hyundai Coupe
Ericy, you could probably fab something like that up yourself without too much trouble in less then a day.
Cost of 3/4 inch mdf, some glue, terminals and carpet of your choice.
I would really consider having a go yourself, unless you feel like being lazy then I would just go ahead and buy that box because that seems a reasonable price for a days labour and material costs.
The only thing I would mention is that you want to brace the part where you are going to be putting your subs because otherwise you will get alot of flex in the box.
Cost of 3/4 inch mdf, some glue, terminals and carpet of your choice.
I would really consider having a go yourself, unless you feel like being lazy then I would just go ahead and buy that box because that seems a reasonable price for a days labour and material costs.
The only thing I would mention is that you want to brace the part where you are going to be putting your subs because otherwise you will get alot of flex in the box.
#8
Senior Member
Thread Starter
Join Date: Mar 2006
Posts: 7,799
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon
I could make it but the cost is so low that I would almost rather just get it and reinforce anything I needed to.
Tibbymat, I would love to have a nice FG enclosure like I stated in the beginning but I dont have the money to get it done, or the time to do it myself. Any suggestions you have would be great since I know you do this everyday.
Tibbymat, I would love to have a nice FG enclosure like I stated in the beginning but I dont have the money to get it done, or the time to do it myself. Any suggestions you have would be great since I know you do this everyday.
#9
i think it looks great.. VERY clean. and a good deal. like you said, you could reinforce it with staples/nails and caulking if needed.
i HATE FG enclosures, and probably always will. MDF > FG
if you are looking for something clean that takes up the rear of the car, this would be the thing to buy.
i really liked the box i made for my tib.. was very nice for the acoustics also, and took up less than half the hatch area for 2 12"s
i HATE FG enclosures, and probably always will. MDF > FG
if you are looking for something clean that takes up the rear of the car, this would be the thing to buy.
i really liked the box i made for my tib.. was very nice for the acoustics also, and took up less than half the hatch area for 2 12"s
#10
Senior Member
Join Date: Mar 2006
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 01/Hyundai/Tiburon
lol thats my car there....that guy lives about an hour away from me and found me on cardomain and had me come down so he could get a template for our cars and gave me the box for free just for coming. But the box is really well made and fits real nice, i had him cut out a JL emblem at the top of the box for me after he took that pic.