So I got my Oz-Flow 60 mm BBTB installed correctly finally. laugh.gif: Now when I am driving down the road everything will be fine for awhile then it is as if I totally let off the throttle for a second. I watch the A/F gauge and it totally leans out like engine braking does to it. I am thinking/hoping/praying it is only the TPS. Does it sound like that is what it is? Tibbychick, can you hook me up with one? cool.gif

 

make sure the tps sensor is on tight.

 

I am missing one screw, but the other one is tight. Maybe it's twisting. I don't have anything on hand to replace it with though....

 

^Java, I'm missing one screw on my TPS also and my car works fine. I used some exhaust tape and wrapped it where the screw was missing to give it some support

 

Ok, I went out and took the one screw I had and put it in the bottom hole. Then I found a miniature zip-tie and put it through the top hole. I reset my ECU and it is idling at 7-800 rpm and driving good. It seems like that fixed it, I guess there is more torque on the TPS than I thought there would be.