My Ideas For Making The Megan Equal Length Header Fit Everything
Thread Starter
http://www.hyundaiaftermarket.org/images/vendor1.png
Joined: Dec 2002
Posts: 3,237
Likes: 0
Anything about the slave I didn't understand as I'm completely ignorant to the use of the part, what it is, etc. I didn't even know you meant the slave cylinder until I read a few posts up when Denis said its in the way. So the stock piece was in the way, and you took it apart, cut the rod down to size, then used a different aftermarket cylinder to use with the now shorter rod, and everything works the way its supposed to? Thanks smile.gif
Senior Member
Joined: Sep 2007
Posts: 962
Likes: 0
From: Elkhart, IN
Vehicle: 2003 Tiburón GT
^^^ that's right.
he moved the slave cylinder, looked for a similar but smaller slave cylinder (oem for some other car) and shortened the rod... in words it seems like a lot of work but its not. hehe it just common sense.
he moved the slave cylinder, looked for a similar but smaller slave cylinder (oem for some other car) and shortened the rod... in words it seems like a lot of work but its not. hehe it just common sense.
