I want halos
#1
Senior Member
Thread Starter
Join Date: May 2001
Location: Tulsa, OK
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2000 Tiburon
I want halos
I want to put these in my tibs headlights. Do they have to be cut open or is there a simple DIY for it? Didnt see anything on here
#2
Senior Member
Join Date: Apr 2011
Location: Churubusco, IN
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 84 VW Rabbit, 01 Audi A8L, 08 VW GTI
Dammit saw your Avatar and immediately thought of DTN...
Anyway's Shark Racing used to sell Angel Eye Headlight housings, they were pretty pricey though. Otherwise you have to take the headlight apart to install and properly wire them.
Found Em if you're interested
http://www.sharkracing.com/00-01-tib...ye-headlights/
Anyway's Shark Racing used to sell Angel Eye Headlight housings, they were pretty pricey though. Otherwise you have to take the headlight apart to install and properly wire them.
Found Em if you're interested
http://www.sharkracing.com/00-01-tib...ye-headlights/
#3
Junior Member
Join Date: Jan 2014
Location: Fl
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 07 Santa Fe
I saw the Oracle CCFL halo kit on http://4wheelonline.com/oracle-lights.247163 .You need to open the headlight assembly. The easiest way is put them in the oven and to seal them back, you can use butyl rubber sealant.