Help
#1
Junior Member
Thread Starter
Join Date: Jul 2016
Location: Queensland
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 96 Coupe
Help
Hi all. I have been restoring a 96 1.8 manual coupe.
Done all the bushes, bearings, brakes and everything in the rear, no problems.
whilst putting the front back together after replacing everything. Clutch, bushes etc.
Put the new cv drive shafts in, after tightened up the axle bolt i turned the hub and
the engine rocks from side to side like something is out of balance.
Been back over it all, but can not find what is causing it.
Anyone had this problem or can help?
Thanks Richter
Done all the bushes, bearings, brakes and everything in the rear, no problems.
whilst putting the front back together after replacing everything. Clutch, bushes etc.
Put the new cv drive shafts in, after tightened up the axle bolt i turned the hub and
the engine rocks from side to side like something is out of balance.
Been back over it all, but can not find what is causing it.
Anyone had this problem or can help?
Thanks Richter
#2
Administrator
Def the first of this happening. We know others who have done a lot of the same work without any problems. Maybe someone else can chime in with their thoughts.