Exhaust Question
Thread Starter
Junior Member
Joined: Sep 2007
Posts: 15
Likes: 0
From: Lancaster, Pennsylvania
I'm not too car savvy so please bear with me.
I plan on ordering an Apexi N1 universal muffler for my tib.
I also want to order the CarSound Universal High Flow Cat as well. Now, are they going to be compatible together?
I plan on ordering an Apexi N1 universal muffler for my tib.
I also want to order the CarSound Universal High Flow Cat as well. Now, are they going to be compatible together?
Senior Member
Joined: Mar 2006
Posts: 7,799
Likes: 0
Vehicle: 2001 Hyundai Tiburon
Yes. As long as you get the same size piping as your exhaust is you will just weld them in place of the components you have now.
Do you have a full exhaust system? If not you dont need either. Especially the cat.
Do you have a full exhaust system? If not you dont need either. Especially the cat.
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Agreed.
Why not ditch the Apexi N1 muffler, those look horrible and just attract cops and thieves.
Dynomat Super Turbo Muffler FTMFW!
Why not ditch the Apexi N1 muffler, those look horrible and just attract cops and thieves.
Dynomat Super Turbo Muffler FTMFW!
Member
Joined: Feb 2008
Posts: 48
Likes: 0
From: Manchester TN
Well now Red, you know some people just love the look and want their cars to sound like pissed off weedeaters!! Rice ya know. Personally I am a glasspack man myself. Put one of these bad boys
http://store.summitracing.com/partdetail.a...mp;autoview=sku
in the exhaust tunnel where the stock resonator sits similar to how I think you did Red and then finish it off with either just a tip if you want it LOUD or another glasspack or a Dynomax. I personally LOVE the Edelbrock Performer RPM glasspack to finish it out but alas you can't buy those anymore since they replaced their lineup with a chambered muffler...luckily I have a few laying around from my older hot rodding days so I am safe for now! That will be the setup I put on my Tib when I finish out the exhaust.
http://store.summitracing.com/partdetail.a...mp;autoview=sku
in the exhaust tunnel where the stock resonator sits similar to how I think you did Red and then finish it off with either just a tip if you want it LOUD or another glasspack or a Dynomax. I personally LOVE the Edelbrock Performer RPM glasspack to finish it out but alas you can't buy those anymore since they replaced their lineup with a chambered muffler...luckily I have a few laying around from my older hot rodding days so I am safe for now! That will be the setup I put on my Tib when I finish out the exhaust.
Thread Starter
Junior Member
Joined: Sep 2007
Posts: 15
Likes: 0
From: Lancaster, Pennsylvania
I just have a stock exhaust right now. I don't know alot about exhausts but I know that I would like the whole shibang.
I want something not too loud but not too quiet either and at least a 1-10hp gain if possible.
I was thinking about having one made for me but I wouldn't even know what to tell the guys at the shop to make.
Can someone help me out with that? And I know different shops charge different prices, but if you had to guess-timate, about how much would having a full custom exhaust cost?
I want something not too loud but not too quiet either and at least a 1-10hp gain if possible.
I was thinking about having one made for me but I wouldn't even know what to tell the guys at the shop to make.
Can someone help me out with that? And I know different shops charge different prices, but if you had to guess-timate, about how much would having a full custom exhaust cost?
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Sure we can.
I'm gonna be mean, and close your thread.
What you need to do is SEARCH, and read. I put up a thread with my current exhaust, what exactly to ask for, videos, pictures, EVERYTHING, and it's what you are looking for.
There are a few dozen threads here for you to look at, with the RIGHT info.
I'm gonna be mean, and close your thread.
What you need to do is SEARCH, and read. I put up a thread with my current exhaust, what exactly to ask for, videos, pictures, EVERYTHING, and it's what you are looking for.
There are a few dozen threads here for you to look at, with the RIGHT info.