what is the rubber isolater that I need??? I went and bought the clamps, and that seems to look like everything that I need!

 

see how mine has that little black rubber peice at the end, you will need one of those.

 

ohh ok! That was included when i bought it!
But where can I get that little rubber spacer thing that spaces the pipe from the frame (its close to the filter)

Ohh..and does installing this on my 98 tib fx 5spd...will it require me to move my battery?

 

If your talking about the 2nd silicone coupler thats on the filter side that connects the filter to the pipe? Most car parts shops have them or can order them. Grab a phone book and start calling.

And you will not need to move your battery.

 

Im talking about that little isolater that spaces the intake out from the frame...
It's like a little rubber piece, and a bolt goes through it, and bolts the intake to the frame?

I just need to know where I can get one?

 

That's EASY mang. Contact AEM and let them know you just got one and it didn't come with the isolator.

 

you could make one with a piece of all thread, 3/4" piece of rubber standoff, 2 washers and a nut at a hardware store. The thread the same size as all of those 10mm screws you now have laying around wink1.gif

put the washers on either side of the standoff, slide the all thread through, put the nut on the end. you're good to go with a fully functional standoff