07 Sonata 3.3 Upgrade ?'s
#1
Junior Member
Thread Starter
Join Date: May 2012
Location: Dallas
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Hyundai Sonata
07 Sonata 3.3 Upgrade ?'s
Have an 07 Sonata GLS Sport 3.3 V6 with factory dual exhaust. Have $1k to drop now and I am looking for best engine performance upgrade possible.... air filter, chip, mods? Any and all ideas welcomed. Really appreciate any and all help. Thanks.
#2
Senior Member
Join Date: Nov 2004
Location: Pittsburgh area
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2004 Lincoln Aviator
I don't even know which motor that is, the code for the motor. but you can always have custome exhaust work done. try these sites
www.kspec.com
www.sharkracing.com
www.evofusionusa.com
and any other sponsor links. You would have better support if you had the four cylider
www.kspec.com
www.sharkracing.com
www.evofusionusa.com
and any other sponsor links. You would have better support if you had the four cylider
#4
I've purchased the larger diameter front and rear sway bars offered on 2009 and 2010 Sonata with 3.3 and suspension package. Also installed fresh air intake and box from 2009 Sonata with 3.3, and installed K&N air filter 33-2346. Intake has a more direct route to throttle body and not around battery as with previous models. Would have to purchase these items from dealership. If interested, I can submit part numbers. K&N also offers oil filter cartridge PS-7022 for 3.3 application (link below);
http://www.knfilters.com/search/prod...x?prod=PS-7022
Update: FRAM now manufactures a synthetic oil filter cartridge for 06 - 2010 Sonata 3.3, FRAM Ultra Synthetic oil filter XG9999. I know it's FRAM however, reviews have been positive (links to photos below);
http://www.dragtimes.com/images-clas...0406619402.jpg
FRAM website;
http://www.framcatalog.com/PartDetai...?b=F&pn=XG9999
Additional discussions on upgrades can be found here;
http://www.hyundai-forums.com/181-nf...ts-sonata.html
silvershark78, some information about the Hyundai 3.3 engine;
The Hyundai Lambda engine family is Hyundai's modern all-aluminum V6. All versions of this engine use a timing chain. The 3.3 L G6DB version was introduced with the 2006 Sonata. It produces 237–264 hp @ 6,000 rpm and 230 lb·ft of torque at 3,500 rpm depending on
year and application. The 3.3 L G6DH version was introduced with the 2012 Azera. It offers GDI and dual CVVT. The engine produces 294 hp (219 kW; 298 PS) at 6,400 rpm and 255 lb·ft (346 N·m) of torque at 5,200 rpm.
Applications:
2008-2011 Hyundai Azera (G6DB)
2012- Hyundai Azera (G6DH)
2007-2009 Hyundai Santa Fe (G6DB)
2006-2009 Hyundai Sonata (G6DB)
2007-2009 Kia Sorento (G6DB)
http://www.knfilters.com/search/prod...x?prod=PS-7022
Update: FRAM now manufactures a synthetic oil filter cartridge for 06 - 2010 Sonata 3.3, FRAM Ultra Synthetic oil filter XG9999. I know it's FRAM however, reviews have been positive (links to photos below);
http://www.dragtimes.com/images-clas...0406619402.jpg
FRAM website;
http://www.framcatalog.com/PartDetai...?b=F&pn=XG9999
Additional discussions on upgrades can be found here;
http://www.hyundai-forums.com/181-nf...ts-sonata.html
silvershark78, some information about the Hyundai 3.3 engine;
The Hyundai Lambda engine family is Hyundai's modern all-aluminum V6. All versions of this engine use a timing chain. The 3.3 L G6DB version was introduced with the 2006 Sonata. It produces 237–264 hp @ 6,000 rpm and 230 lb·ft of torque at 3,500 rpm depending on
year and application. The 3.3 L G6DH version was introduced with the 2012 Azera. It offers GDI and dual CVVT. The engine produces 294 hp (219 kW; 298 PS) at 6,400 rpm and 255 lb·ft (346 N·m) of torque at 5,200 rpm.
Applications:
2008-2011 Hyundai Azera (G6DB)
2012- Hyundai Azera (G6DH)
2007-2009 Hyundai Santa Fe (G6DB)
2006-2009 Hyundai Sonata (G6DB)
2007-2009 Kia Sorento (G6DB)
#6
Unfortunately, there isn't any aftermarket RAM / CAI for 2006 - 2010 Sonata 3.3 V6. Weapon R manufactures one that goes from air box to throttle body. Might as well just keep OEM air intake. Here's a link to discussion on cold air intake;
http://www.hyundai-forums.com/181-nf...om-v6-cai.html
http://www.hyundai-forums.com/181-nf...om-v6-cai.html
#9
Hello members,
I've been searching for a quality one piece non adjustable strut tower brace for 06 - 2010 Hyundai Sonata with 3.3 V6. However, none are available.
I've contacted Kyle Millen at Stillen Performance. They are interested in producing one piece strut brace for 06 -2010 Sonata 3.3 however, would like to see what demand is before committing to project.
So, all that are interested, please send e-mail to Kyle at;
kmillen@stillen.com
Include Hyundai Sonata strut brace in subject line and include https://www.hyundaiaftermarket.org in body. For example;
As per posting on https://www.hyundaiaftermarket.org, I'm interested in seeing strut brace produced for the 06 -2010 Sonata with 3.3 engine.
Hopefully enough interest will be generated to have one produced!
Thanks in advance, to all members for taking the time to view.
I've been searching for a quality one piece non adjustable strut tower brace for 06 - 2010 Hyundai Sonata with 3.3 V6. However, none are available.
I've contacted Kyle Millen at Stillen Performance. They are interested in producing one piece strut brace for 06 -2010 Sonata 3.3 however, would like to see what demand is before committing to project.
So, all that are interested, please send e-mail to Kyle at;
kmillen@stillen.com
Include Hyundai Sonata strut brace in subject line and include https://www.hyundaiaftermarket.org in body. For example;
As per posting on https://www.hyundaiaftermarket.org, I'm interested in seeing strut brace produced for the 06 -2010 Sonata with 3.3 engine.
Hopefully enough interest will be generated to have one produced!
Thanks in advance, to all members for taking the time to view.