ab-b Hyundai bringing 1,000-hp Genesis Coupe to SEMA
09-23-2013, 02:17 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2008
Location: The News Room
Posts: 9,188
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Hyundai
ab-b Hyundai bringing 1,000-hp Genesis Coupe to SEMA
Filed under: Aftermarket, SEMA Show, Coupe, Performance, Hyundai, Specialty, Design/Style
Hyundai has just unleashed its first volley at the SEMA crowd in the form of the Genesis Coupe you see above, and it's a duesy. By partnering with the powertrain gurus from Bisimoto, Hyundai has managed to cram a thousand horsepower into this highly accessorized black and blue machine, using a mill based on the naturally aspirated Genesis Coupe 3.8 R-Spec engine block.
The big powers are a pair of Bisimoto/Turbonetics BTX6462 turbochargers, which are joined by a full set of aftermarket internals that include new connecting rods, camshafts, forged pistons, fuel pump and fuel injectors, and a massive intercooler. With all that power, the chassis was going to need some updates, such as a complete roll cage and a custom coilover suspension setup.
As is expected from a SEMA show car, there is a bespoke graphics and bodywork package, highlighted by a carbon fiber hood and decklid. Check out the two images provided by Hyundai and the press release below for all the details.Continue reading Hyundai bringing 1,000-hp Genesis Coupe to SEMA
Hyundai bringing 1,000-hp Genesis Coupe to SEMA originally appeared on Autoblog on Mon, 23 Sep 2013 15:44:00 EST. Please see our terms for use of feeds.
Permalink | Email this | Comments
View the full article
Hyundai has just unleashed its first volley at the SEMA crowd in the form of the Genesis Coupe you see above, and it's a duesy. By partnering with the powertrain gurus from Bisimoto, Hyundai has managed to cram a thousand horsepower into this highly accessorized black and blue machine, using a mill based on the naturally aspirated Genesis Coupe 3.8 R-Spec engine block.
The big powers are a pair of Bisimoto/Turbonetics BTX6462 turbochargers, which are joined by a full set of aftermarket internals that include new connecting rods, camshafts, forged pistons, fuel pump and fuel injectors, and a massive intercooler. With all that power, the chassis was going to need some updates, such as a complete roll cage and a custom coilover suspension setup.
As is expected from a SEMA show car, there is a bespoke graphics and bodywork package, highlighted by a carbon fiber hood and decklid. Check out the two images provided by Hyundai and the press release below for all the details.Continue reading Hyundai bringing 1,000-hp Genesis Coupe to SEMA
Hyundai bringing 1,000-hp Genesis Coupe to SEMA originally appeared on Autoblog on Mon, 23 Sep 2013 15:44:00 EST. Please see our terms for use of feeds.
Permalink | Email this | Comments
View the full article
