Hyundai Accent Forum The Hyundai Accent Forum. Hyundai's little champ. While the Hyundai Accent and Hyundai Excel may be small, they respond very well to aftermarket modifications and is among the favorites for Hyundai tuners.

SAFC-II help

Old Mar 2, 2009 | 12:11 PM
  #1  
BretW's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2008
Posts: 19
Likes: 0
Vehicle: 2004/Hyundai/Accent
Default SAFC-II help

So I followed the wiring diagram that Floyd posted and my SAFC-II( Apexi AFCNeo) wont turn on or anything. Honestly I want this in to help tune my car better. I NEED HELP BAD!!!! Also I hook it up to a 12 Volt Power supply and it works fine sooooo, if anything i could not be getting power to the unit.
Reply
Old Mar 2, 2009 | 04:30 PM
  #2  
DTN's Avatar
DTN
Moderator
 
Joined: Feb 2009
Posts: 11,732
Likes: 5
From: Leesville, Louisiana
Vehicle: 2001 Hyundai Tiburon
Default

We can't give you help unless you give us some information to work with. All we know now is that you hooked it up and you're not getting power. Did you check the wires with a multimeter to see if they are getting power?
Reply
Old Mar 3, 2009 | 10:59 AM
  #3  
187sks's Avatar
Administrator
 
Joined: Mar 2006
Posts: 12,515
Likes: 2
From: Lacey, WA
Vehicle: Two Accents, Mini, Miata, Van, Outback, and a ZX-6
Default

My wiring diagram was for a 2003. I am not sure if a 2004 is different. If I have some time I will take a look and see on webtech.
Reply
Old Mar 3, 2009 | 05:00 PM
  #4  
BretW's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2008
Posts: 19
Likes: 0
Vehicle: 2004/Hyundai/Accent
Default

Ok, sweet thanks for the help!
Reply
Old Mar 3, 2009 | 05:04 PM
  #5  
BretW's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2008
Posts: 19
Likes: 0
Vehicle: 2004/Hyundai/Accent
Default

<div class='quotetop'>QUOTE(DTN @ Mar 2 2009, 03:30 PM) </div><div class='quotemain'>We can't give you help unless you give us some information to work with. All we know now is that you hooked it up and you're not getting power. Did you check the wires with a multimeter to see if they are getting power?</div>

Yeah totally forgot about that its an 04 Accent 1.6l Alpha. Hope thats enough, also I tried wiring it to a positive and ground wire that goes to the ECU and still didnt even turn on. I connect the SAFC-II to a power supply, and it turns on and works fine.
Reply
Old Mar 3, 2009 | 06:42 PM
  #6  
DTN's Avatar
DTN
Moderator
 
Joined: Feb 2009
Posts: 11,732
Likes: 5
From: Leesville, Louisiana
Vehicle: 2001 Hyundai Tiburon
Default

I♦t sounds like you may be using the wrong power, ground, and remote wires
Reply
Old Mar 7, 2009 | 07:33 PM
  #7  
BretW's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2008
Posts: 19
Likes: 0
Vehicle: 2004/Hyundai/Accent
Default

So I followed the MAP sensor wire and its pick for 04, but were is the throttle postion sensor located, and RPM sensor wire located?
Reply
Old Mar 8, 2009 | 08:35 PM
  #8  
Fintile's Avatar
Senior Member
 
Joined: Apr 2008
Posts: 780
Likes: 0
From: San Diego, Ca
Vehicle: 2004 Hyundai Accent 1.6T
Default

It should be the same wire diagram FLoyd...I used the wire diagram from an 02 and mine worked just fine.
Reply
Old Mar 9, 2009 | 10:36 AM
  #9  
187sks's Avatar
Administrator
 
Joined: Mar 2006
Posts: 12,515
Likes: 2
From: Lacey, WA
Vehicle: Two Accents, Mini, Miata, Van, Outback, and a ZX-6
Default

Hmm...the wiring diagram from the 02 doesn't match my 03 at all. I wonder if 03 is an odd year where they changed it for some reason and then switched back?

There are major differences between my wiring (from my factory ETM and actually on the car) and DREROB's ECU pinout chart. they're about 90% the same but that's still 10% different.
Reply
Old Mar 9, 2009 | 11:05 AM
  #10  
BretW's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2008
Posts: 19
Likes: 0
Vehicle: 2004/Hyundai/Accent
Default

I tried Floyd's diagram and it didn't work for me. I managed to find the wires I needed. I just need to find the RPM sensor wire though. But I do not think the 04s are the same as the 03s
Reply


All times are GMT -6. The time now is 08:22 PM.