I do not have a tach on my Accent. I was wondering how hard would it be to swap clusters with another Accent that has a tach. Has anyone tried this? If so, any instructions???

Thanks all

 

If I'm not mistaken, its not that easy. Each gauge cluster is connected differently (Electrial wise)...

Check out www.hmaservice.com and see if you can get a wiring diagram for an accent gauge cluster with a tach, and without a tach. If the wires/connections line up...then it SHOULD work.

 

Great! Thanks Ramdom

 

Guy,

I've done this, there are instructions over at HP.com in the Accent forum....

If you need any help, Email me

Jason

 

<div class='quotetop'>QUOTE</div><div class='quotemain'>SE-Rious:
I've done this</div>Kudo's dude!

 

Thanks Jason...I've got the info from HP & if I've run into any problems you'll be the 1st person I contact.

Thanks again!

 

If you can't find the damn white wire, contact me. jason is great with this . he helped me a lot, but if your ECU is different, feel free to contact me.

Peace out!!!

 

Thanks Memphis060! I've got to make a trip out to the junk yard & see if I can find a cluster!

 

No problem my friend!!! smile.gif