Accent MANUALs.... ? and Rear suspension?
Thread Starter
Senior Member
Joined: Mar 2003
Posts: 101
Likes: 0
From: Baltimore
Vehicle: 2002 Hyundai Accent
Haynes to my knowledge and perhaps Chiltons still has no manuals for us... Anyone know where or what a 2002 Accent owner can do for at hand info regarding this year of the Hyundai Accent?
Also i let the ice get the best of me last week and smashed the right rear into a curb... looks like the only damage I can see at the moment is that the forward bar of the two that comes from the bottom of the lower strut to the mounting area near center bottom of undercarriage is BENT like it took all the force of the inertia impact...
How does the long 6" bolt that ties these bars to the lower strut come out?
Point me in some direction Xperts. And order of removal!!
THANK YOU in advance..
Also i let the ice get the best of me last week and smashed the right rear into a curb... looks like the only damage I can see at the moment is that the forward bar of the two that comes from the bottom of the lower strut to the mounting area near center bottom of undercarriage is BENT like it took all the force of the inertia impact...
How does the long 6" bolt that ties these bars to the lower strut come out?
Point me in some direction Xperts. And order of removal!!
THANK YOU in advance..
Administrator

Joined: Mar 2006
Posts: 12,515
Likes: 2
From: Lacey, WA
Vehicle: Two Accents, Mini, Miata, Van, Outback, and a ZX-6
You can buy a shop manual, or use webtech.
I'm a bit tired but if you're asking what I think you're asking you just take the bolt off like any other bolt except that you might have to tap it out with a hammer if it binds.
I'm a bit tired but if you're asking what I think you're asking you just take the bolt off like any other bolt except that you might have to tap it out with a hammer if it binds.
hmaservice.com
Or the shop manual.. I prefer that because I hate reading stuff like that on the interwebs. The Hyundai shop manual > any knock off 20 years in one manual you get an autozone.
For the bolt? Punch + Hammer, Screw Driver + Hammer, Get pissed off enough and hit it really hard with a hammer, that is of course after taking the nut off.
Or the shop manual.. I prefer that because I hate reading stuff like that on the interwebs. The Hyundai shop manual > any knock off 20 years in one manual you get an autozone.
For the bolt? Punch + Hammer, Screw Driver + Hammer, Get pissed off enough and hit it really hard with a hammer, that is of course after taking the nut off.




