How do I undo these bolts?
Thread Starter
Senior Member
Joined: Dec 2008
Posts: 3,837
Likes: 0
From: Floating around the AUDM
Vehicle: X3 Sprint, S-Coupe Turbo
How do I undo these bolts?
Has anyone seen these before? I'm new to this.
The bolt head:
And the nut:
Surely someone here would know.
The bolt head:
And the nut:
Surely someone here would know.
Member
Joined: Feb 2009
Posts: 77
Likes: 1
From: wauchula FL
Vehicle: 2001 Tib1
[quote name='OTECTom' timestamp='1347365460' post='668234']
Righty tighty, lefty loosey.
OTECTom
we all thought it .. I ran into something Like that a while back Just got one of my old rusted sockets ground the bevel off and ground the side thin enough to get in. That's assuming there not real tight may crack your socket if its torqued down pretty good but that's why you use a old one or get a cheap new one
Righty tighty, lefty loosey.
OTECTom
we all thought it .. I ran into something Like that a while back Just got one of my old rusted sockets ground the bevel off and ground the side thin enough to get in. That's assuming there not real tight may crack your socket if its torqued down pretty good but that's why you use a old one or get a cheap new one
Thread Starter
Senior Member
Joined: Dec 2008
Posts: 3,837
Likes: 0
From: Floating around the AUDM
Vehicle: X3 Sprint, S-Coupe Turbo
I found my old nut cracker in my toolbox.
I'll give it a whirl tonight because I don't want to drive 30 miles to get my bloody dremel. Cheers for the suggestions lads.
I'll give it a whirl tonight because I don't want to drive 30 miles to get my bloody dremel. Cheers for the suggestions lads.
