2000 elantra
11-05-2011, 10:07 AM
#1
Junior Member
Thread Starter
Join Date: Nov 2011
Location: so cal
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: hyundais
2000 elantra
HELP CANNOT REMOVE THE PLUG FROM THE ECU, I took out the screw on the far side and pivoted the retainer clip,the clip side has no problem but the screw side wont release.I have been a mechanic for 35 years and never seen this ? could it be melted,is there another clip,the car runs but dies when the ecu shuts down. Any help would be appriciated please respond via e-mail...2budzracing@gmail.com...Iwas told by another(one of your moderators) that you guys are awesome....THANKS Bud
11-05-2011, 10:38 AM
#2
Super Moderator
Moved to the Help forum because the ECM (and most of the rest of the car) is the same as on Tiburons
This cat found me somehow and emailed me this question and I couldn't remember how to disconnect the computer at shouldbesleeping-thirty this morning. Somebody who's done it recently lay down the knowledge!
This cat found me somehow and emailed me this question and I couldn't remember how to disconnect the computer at shouldbesleeping-thirty this morning. Somebody who's done it recently lay down the knowledge!
