JetHotCoating

laugh.gif
Hi! My name is Chris and I’m a representative from JET-HOT Coatings. I was contacted and asked if I could run a special for the members of this group. I would be very happy to offer the members of this board a group purchase discount. If you’re not familiar with JET-HOT please feel free to read the following information and/or visit our web site at www.jet-hot.com.

++++++++++++++++
JET-HOT is the number one supplier of ceramic coated headers in the world. We invented this coating and have over 20 years of experience in the science of engine exhaust technologies.


Technical benefits are as follows : Looks great, reduces under-hood temperatures by 50 degrees Fahrenheit and more, keeps pipes up to 50% cooler, Gives you 1-3% extra horsepower, extends average header life by at least 10 times, and improves safety in an accident by reducing the probability of fireballing.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~
We can coat almost anything you want including manifolds, oil pans, springs, and a whole lot more!!!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~

In order to offer the best discount possible, I’ll need to get at least 10 people. Once I get 10 or more people , I can offer a 30% discount off our retail coating price. I understand that not everyone will be ready at the same time so I will be running this special from now till 2/28/04. The normal retail price to coat a 4cyl style header, fully in&out with the JET-HOT sterling silver finish ,is $165+s&h back. You would receive a 30% discount off the retail price so you save $49.50! Please keep in mind we can coat a variety of different parts such as intakes, exhaust systems, pulleys, brackets,etc. Please feel free to call or email me with any questions.

In order to provide this discount, I’ll need your full name,address and contact phone number. With this information, I can provide all the information needed to ship the parts in for coating and receive your 30% discount.

Our normal turnaround is 4-5 days in house plus shipping time back.

PLEASE CALL ME AT 1-800-432-3379 EXT 110 OR EMAIL ME AT : CHRIS@JET-HOT.COM
(Please note: I will be out of the office 12/22/04-12/28/04)

Please visit our web site at: www.jet-hot.com


Points to consider in making your decision are:
• JET-HOT has an impeccable reputation, unequaled quality and a guarantee. A guarantee we stand behind.
• JET-HOT parent company Metallic Ceramic Coatings Inc, engineered our coatings to the third generation which contains silver powders allowing your components to look better, last longer, and outperform all other coatings.
• JET-HOT uses expensive aluminum oxide to clean components. We don’t use sand like others.
• JET-HOT applies two exterior coatings and two interior coatings and not just one layer as everyone else does.
• JET-HOT has the most brilliant appearance of any coating, not just an ok or so-so look.
• JET-HOT will work with you to help you achieve your objectives and will gladly provide you with technical know how at no additional cost.
• JET-HOT has the most cost effective pricing and there are no hidden charges.

javageek

Thanks for posting. I just wanted to point out the end date should be 2/28/05. Hopefully everyone jumps in on this deal!

'treezy

Damn good turn around time as well (4-5 days). If I have some cash left over after the holidays I'll be contacting you...thanks for the deal

Jaws021

WOW
looks good..


Question..

What would you recommend for the high temps of a turbo manifold? i know some companies have only flat colors because of the extremely high temps...

What do you guys have to offer for turbo manifold, and turbo coatings as far as colors?

thanx

OdessitPashka

and how much would it cost to powder coat a log style turbo manifold. It's 60-70% smaller than any 4cyl aftermarket header.

majik

can you do colors or just a stainless steel look? Are you able to do valve covers (what price) or fluid resevoirs?

faithofadragon

Redz edit as needed if i did this wrong


*Edit DONE LOL*

CyberShark

2/28 is plenty of time to save up...good deal.

REDZMAN

<div class='quotetop'>QUOTE (Jaws021)</div><div class='quotemain'>Question..

What would you recommend for the high temps of a turbo manifold? i know some companies have only flat colors because of the extremely high temps...

What do you guys have to offer for turbo manifold, and turbo coatings as far as colors?</div>

Colors are listed now my mang. As for the VERY VERY high temps, I will email and ask him for ya.



I told ya'll I was workin on it.

LOL

Here's the deal...

PERMANANT 15% discount for the site. Yup.

Any time we can get 10 items to ship in at the same time, it's a 30% Discount.

30 FREAKING PERCENT.

I am sending my headers and my airram IM.

That's 2 items.

Get the idea?

Okay, we will post about this in the discounts area and also I will arrange to get us to send in at least 10 items at once.

Here are the answers to a few questions I asked Chris at Jet Hot.


<div class='quotetop'>QUOTE </div><div class='quotemain'>1. Can we get the dates changed?

1) I will extend the date as needed. I’ll just need to know what is
needed.


2. Can we get a discount whenever we can get, let's say, 10 items
together to ship in?

2) I can offer a 30% discount when I get groups of 10 or more. The
normal discount that will be offered to your members is 15% off.


4. What would the cost be to coat my Airram Intake manifold?
http://www.kspec.com/list.php?ac_id=80&ai_id=658
[]http://www.kspec.com/list.php?ac_id=80&ai_id=658]

4) The retail price to coat the 4cyl intake with the sterling silver
finish (we coat outside only) is $110. Though the group purchase, you
would get a 30% discount off the price.


5. What colors are available for this?

5) I can offer the sterling silver, flat black, blue or grey. I have
included a sample of the colors.</div>

As for doing other items, they can do anything, but I belive it's got to be metal. These things have to be heated.


The price for a Turbo Manifold will prolly run about the same as quoted above for my Airram IM.

Tibbychick

got a better pic of the colors? Im thinking about doing my intake manifold.