Iceman Billet Aluminum Throttle Bodies!
#1
http://www.hyundaiaftermarket.org/images/vendor1.png
Thread Starter
Join Date: Dec 2002
Posts: 3,237
Likes: 0
Received 0 Likes
on
0 Posts
Re: Interior Paint Ideas
Hey guys,
well, I'm a distributor for Iceman intakes. Well I was informed a while back that they are starting a line of Big Bore Throttle Bodies for Imports and Domestics. I asked him if we could do a line for Hyundais.
So he said yes if i get the minimum people required for covering the cost of tooling.
Ok, I need about 15 people for this buy, so in order to make this go as fast as possible, I'm going to discount this item about 100 bux for you hyundai fellas out there.
The sizes are for a 60mm N/A BBTB
There will also be a 68mm for Forced Induction only.
Actually, I showed him my Air Ram Manifold, and he measured it to be 67mm and said he wanted to make them to fit that exact manifold, he was quite impressed on the quality of the manifold, mainly how smooth the runners were.
MSRP on these is 375 for the Dodge SRT-4s, and Honda Civics,
For just this GB I'll offer them for 275
These are not just aluminum, they are high quality billet aluminum you wont find anywhere else.
Ask any questions you want answered, these will take 7-14 days from start to finish to produce, so if we want new TBs that are made in the good ol' USA and not imported parts from Korea, we need to jump on this.
I'm buyer number 1.
After these slots are filled up I'll be selling these for MSRP so if you've thought about it before and decided not, then now would be a good time.
Shipping is 10 bux anywhere, if it cost more I'll take the shot to my wallet so you dont have to. I really want this to happen, and I'm not making crap off this because of the huge ass discount. So lets make it happen.
Thanks all
Heres the list
1 Blacktibs 68mm
2 LeadFoot 60mm
3
4
5
6
7
8
9
10
11
12
13
14
15
well, I'm a distributor for Iceman intakes. Well I was informed a while back that they are starting a line of Big Bore Throttle Bodies for Imports and Domestics. I asked him if we could do a line for Hyundais.
So he said yes if i get the minimum people required for covering the cost of tooling.
Ok, I need about 15 people for this buy, so in order to make this go as fast as possible, I'm going to discount this item about 100 bux for you hyundai fellas out there.
The sizes are for a 60mm N/A BBTB
There will also be a 68mm for Forced Induction only.
Actually, I showed him my Air Ram Manifold, and he measured it to be 67mm and said he wanted to make them to fit that exact manifold, he was quite impressed on the quality of the manifold, mainly how smooth the runners were.
MSRP on these is 375 for the Dodge SRT-4s, and Honda Civics,
For just this GB I'll offer them for 275
These are not just aluminum, they are high quality billet aluminum you wont find anywhere else.
Ask any questions you want answered, these will take 7-14 days from start to finish to produce, so if we want new TBs that are made in the good ol' USA and not imported parts from Korea, we need to jump on this.
I'm buyer number 1.
After these slots are filled up I'll be selling these for MSRP so if you've thought about it before and decided not, then now would be a good time.
Shipping is 10 bux anywhere, if it cost more I'll take the shot to my wallet so you dont have to. I really want this to happen, and I'm not making crap off this because of the huge ass discount. So lets make it happen.
Thanks all
Heres the list
1 Blacktibs 68mm
2 LeadFoot 60mm
3
4
5
6
7
8
9
10
11
12
13
14
15
#3
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Re: My Custom Made Short Shifter
The Airrams are 68 mang, how'd he get 67? Get him to make a 70MM one so we can just get a bit bored out of our Airrams. I'll prolly pick up one of these when I go turbo.
#7
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Re: Link Standalone engine management systems (interest)
For a 70, I'd prolly be in.
#9
Member
Join Date: Aug 2004
Location: Phoenix, Arizona
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Tiburon
Re: RotorPros Group Buy - Accepting Payment!
if i get back to work next week i will be able to join this GB
I also will be running the air ram manifold with FI so if we can find out on the 70 that would be good
I also will be running the air ram manifold with FI so if we can find out on the 70 that would be good
#10
Re: Duplicolour Green
Ok, this is what they are going to look like and they are BEAUTIFUL!!!!
http://img78.photobucket.com/albums/v289/V...on/e574d804.jpg
http://img78.photobucket.com/albums/v289/V...on/180b3eec.jpg
Chris, hit me up when you get a minute.
http://img78.photobucket.com/albums/v289/V...on/e574d804.jpg
http://img78.photobucket.com/albums/v289/V...on/180b3eec.jpg
Chris, hit me up when you get a minute.