This is an awesome group buy already going on at NewTiburon.com and they neglected to post it anywhere else:

http://www.newtiburon.com/forums/showthread.php?t=6267


$60 for a great mod.

Redzman, is yours going to be starting soon? If not, I am in on this one.

Yeah, for 40 bucks it's a thicker "Phenolic Spacer", and not a gasket. Let me email that guy again and tell him I'm gonna start it.

*EDIT:*

Okay, emailed the other guy on the deal, he should be back to me shortly.

what is a phenolic spacer...and where does it go...effect on performance?

They lengthen the intake runners and increase air velocity into the head, increasing power. They also almost CANCEL the heat transfer between the block and the IM, vastly reducing the intake temperatures and increasing power. Results are usally around 5% and much more throttle responce, not to mention, drops of intake temps around 75 to 100 Degrees.

On the bad side, depending on the thickness of the spacer, you may have to put in new studs.

Sounds good to me for 40....and man what a bad site setup they have...all that generated dash crap for each post is annoying.

Members
 

Yeah, I registered there just to keep the whores from phreaking my name.

It's neat at first, but confusing.

SpeedFactor
 

That site is 56k ---> die!!1!!1!!

....
 

REDZ, I have been interested in the Airram IM from kspec.

w/ the phenolic spacer would the IM be pushed back enough to clear a motoria (AOS) Front strut bar?? I know there have been clearance issues w/ it.

the spacer, IM and matched TB will prob be my next HP mods if so.

Hmm...

Good question. I guess I'd have to see where the IM and the Strut bar are in relation to eachother first.

The Motoria SB should fit over the Airram IM.

I think that RDtiburon kicks ass because we can get better for cheeper with REDZMAN, if everything turns out good, I'm into this group buy...

cool, thanks REDZ

im in on one of theese buys!
redz, i think its gonna be yours. just a few ?'s, whos gonna be makin theese for you, and how thick are they? are we gonna need new studs with this spacer?

A guy I found on Ebay that made them for NT.com.

Dunno.

Dunno.

Waiting for return email.

so is this gb going on now? when does it end? where are we sending the money? and it's $40. how much with shipping?

I've emailed the guy several times now but he doesn't seem to get them unless I email him from Ebay.

I dunno.

Anyways, I'll do that tonight. We may even have a better deal from Speed Factor. I'll let you guys know.

REDZ...does this guy's company have a name or is it just "some guy"? Just wondering if you are sure he is legit and all.

He's legit, but if I can't get ahold of him easily, we will just go with Speed Factor.

would I have to get the studs seperatly?

Okay, I got some answers back finally, I'll post it all in a new thread tomorrow and we can make some choices.

I'm totally in

any word on the spacer?

<div class='quotetop'>QUOTE (REDZMAN)</div><div class='quotemain'>Okay, I got some answers back finally, I'll post it all in a new thread tomorrow and we can make some choices.</div>

Any News? Or are you still huffin the MetalKast?

Actually, the guy got wierd on me. I'm still waiting for a final reply but I don't think it' coming.

Long story, but you may as well get in on this one.