Angel Eyes For Rd1 And Rd2
<div class='quotetop'>QUOTE (blacktibs)</div><div class='quotemain'>Wire set 1 is wired up to the parking lights. Just two wires to tap into and their wired up! 5.00
Wire set 2 come wired with a switch to run into the cabin. 10.00
Price for RD1 is 45 shipped.
Price for RD2 is 90 shipped</div>
<div class='quotetop'>QUOTE (Domi @ Jun 13 2005, 05:52 PM)</div><div class='quotemain'>I'm in
RD1
Blue
Set2
So $65 right?
I'll get some money up my paypal, must be up there in a few days
<div align='right'><{POST_SNAPBACK}></div></div>
$55 for your RD1 and wiring #2
Wire set 2 come wired with a switch to run into the cabin. 10.00
Price for RD1 is 45 shipped.
Price for RD2 is 90 shipped</div>
<div class='quotetop'>QUOTE (Domi @ Jun 13 2005, 05:52 PM)</div><div class='quotemain'>I'm in
RD1
Blue
Set2
So $65 right?
I'll get some money up my paypal, must be up there in a few days
<div align='right'><{POST_SNAPBACK}></div></div>
$55 for your RD1 and wiring #2
Senior Member

Joined: Aug 2009
Posts: 11,992
Likes: 0
From: Washington D.C.
Vehicle: Hyundai Tiburon FX
for people who don't know howe to get MO's: you can get moneyorders for 90cents at all post offices. i've been doing it forever before i got paypal. just pay the money up front on how much you want the MO to be and they will give it to you. you sign the back of it for validation and just fill out the address. then you slip it in an envelope and send it to blacktib's addy. make sure blacktibs approves of this beforehand.
blacktibs, you will have so many angel eyes to make it's not even funny. you putting a limit on this?
also the wires do not have to be tapped into anything. just skin the ends (+ -) and fit them between the wiring harness plugs in between the plugs. it should just slide in and hold in place. the only hassle would be to take the headlamp assembly out to insert the angel eyes. you can run the wires through the rubber sealers on the plastic caps without problems.
blacktibs, you will have so many angel eyes to make it's not even funny. you putting a limit on this?
also the wires do not have to be tapped into anything. just skin the ends (+ -) and fit them between the wiring harness plugs in between the plugs. it should just slide in and hold in place. the only hassle would be to take the headlamp assembly out to insert the angel eyes. you can run the wires through the rubber sealers on the plastic caps without problems.


