I want one, I'll paypal you the $15.75 right now, thank's

 

Solo, you can send me a Money Order or a Personal Check mang.

Or just get Paypal. It's easy.

If you send me a personal Check or Money Order it'll only be $15.00, but I'll wait 7 days for it to clear before I make it official.

Maxxtib, noted.

 

Guys I'm in I'll paypal the money right now. I'm gonna just wait till I get it, then install it and compare to the B&M, which I've only used for about 2 months. Like mentioned before, I really like it, however it does seem a bit tall. I'd buy the SR shifter if I had any interest in helping out SR... buuuuuut I dont so here we go, needlessly spending money just like REDZ hehe. Make that 6 fellas

 

LOL

Hey, you do know the SR shifter is just the RSide Basic right?

Blacktibs added.

 

Actually Redz, they've got a B&M look a like now too:

http://www.sharkracing.com/in/hyundai/shifter1.html

It looks like the OBX or There's another Korean Company that makes a similar one, the name escapes me now

 

Thats the OBX shifter they are trying to pawn off, I had one and tossed it out a week later and got me the b&m which I'm gonna toss for the R-Side and hopefully this will be the last one.

 

Redz, I'm in. Sending $$$ now.
00 tib, i can get my B&M part number for you if that will help w/ ordering. Or is this shifter a straight bolt in for both 00 and 01's?? (wasn't there a differnece between part numbers for some 01's for the B&M shifter?)

Will the threads accept the stock knob??

Also if this GB is going to end in march, i will need to change my addy.
The company i work for is moving right around that time, i will switch my addy once it gets a bit closer.

Redz can you check on something for me??

http://www.kspec.com/qacont.php?qa_table=f...&aq_listnum=734

 

<div class='quotetop'>QUOTE (KayJai)</div><div class='quotemain'>Actually Redz, they've got a B&M look a like now too:

http://www.sharkracing.com/in/hyundai/shifter1.html

It looks like the OBX or There's another Korean Company that makes a similar one, the name escapes me now</div>

Good lord man, that's the one that ART Sports was making.

<div class='quotetop'>QUOTE (tibwrcsbj)</div><div class='quotemain'>Redz, I'm in. Sending $$$ now.
00 tib, i can get my B&M part number for you if that will help w/ ordering. Or is this shifter a straight bolt in for both 00 and 01's?? (wasn't there a differnece between part numbers for some 01's for the B&M shifter?)

Will the threads accept the stock knob??

Also if this GB is going to end in march, i will need to change my addy.
The company i work for is moving right around that time, i will switch my addy once it gets a bit closer.

Redz can you check on something for me??

http://www.kspec.com/qacont.php?qa_table=f...&aq_listnum=734</div>

I'm assuming you are Jason?

As far as I know, this is for all the 1st and 2nd Gens. I'll ask David again if there's a different one for each. I think B&M made the first one and then found that it wouldn't work with the minor revision in later 2nd Gen Tiburons so they had to put a different one out. I think the stock knob will work on this one, something the B&M doesn't offer. I'll find out for sure. Email me the new addy when you move.

As for that link, I went there. What did you want me to check?

 

Yes, I'm Jason, ask blacktibs about me, I'm the guy he thought was you a few months ago.
1.) my tib is a 2000, but after reading your post above I guess it doesn't matter.
2.) actually the B&M does accept the stock knob, i've got it on mine, the alum. one just didn't look right.
3.) I have the addy now, but we aren't sure of what our exact move in date is yet (My co. is building our own building, and i don't know when we will get occupancy, and i don't want anything sent over there to just get lost in the move or sit there until we get in)
4.) I'd like for you to check and see why its taking so long to get a price on it for me, i love kspec's service (glad that you are officially on board w/ them, by the way), but the last post was last wednesday, and i've been putting off my 60k service until i can get the 1.8l intake cam.

Thanks

 

The last post in that thread was from David.

LOL

That's what I don't understand.

You can always email him too at admin@kspec.com He's had some stuff going on at home lately so he's... Preoccupied? I'm gonna call him tonight.