Rd2 Cadamuro Hood
#1
Senior Member
Thread Starter
Join Date: Jul 2004
Location: Eau Claire, WI
Posts: 5,155
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 97 Tib
This is the FlyRyde Group Buy for RD2 Cadamuro Hoods
This GB will run until we have 4 PAID customers.
Payments via PayPal are to be sent to: Payments@FlyRyde.com
You can pay at any time, just put in your Forum Name, Address, and What product you're paying for (in this case, the RD2 Cadamuro Hood) in the PayPal Comments Box, and then make a post on here stating you've paid.
Rules
No dead beats, don't even put yourself on the interested list until you are actually positive you can get the cash, otherwise you just get everyone else's hopes up.
Posts should be in the following format:
1. Forum Name
2. PayPal Address
3. Fiberglass or Carbon Fiber
4. When you'll be ready to pay
5. Interested or Paid (if Paid, please list the date)
Info on the hood
Fiberglass (installed):
Carbon Fiber (installed):
This hood will be a PERFECT fit and full replacement for 00-01 RD2 Tiburons.
This is a replica of the hood made by the Italian company Cadamuro.
Available in both Fiberglass and Carbon Fiber.
Pricing (special first-GB price)
Fiberglass: $300
Carbon Fiber: $500
We will have to wait until Chris sees this thread to estimate shipping costs, although it will vary by each individual location.
Interested List:
1.
2.
3.
4.
Paid List:
1. REDZMAN - redzmang @ rdtiburon.com - CF - Middle or end of Nov. - Paid $100 allready.
2. Ericy321 - Ericy321@aol.com - CF - 2 weeks probably - Paid 165 already
3.
4.
This GB will run until we have 4 PAID customers.
Payments via PayPal are to be sent to: Payments@FlyRyde.com
You can pay at any time, just put in your Forum Name, Address, and What product you're paying for (in this case, the RD2 Cadamuro Hood) in the PayPal Comments Box, and then make a post on here stating you've paid.
Rules
No dead beats, don't even put yourself on the interested list until you are actually positive you can get the cash, otherwise you just get everyone else's hopes up.
Posts should be in the following format:
1. Forum Name
2. PayPal Address
3. Fiberglass or Carbon Fiber
4. When you'll be ready to pay
5. Interested or Paid (if Paid, please list the date)
Info on the hood
Fiberglass (installed):
Carbon Fiber (installed):
This hood will be a PERFECT fit and full replacement for 00-01 RD2 Tiburons.
This is a replica of the hood made by the Italian company Cadamuro.
Available in both Fiberglass and Carbon Fiber.
Pricing (special first-GB price)
Fiberglass: $300
Carbon Fiber: $500
We will have to wait until Chris sees this thread to estimate shipping costs, although it will vary by each individual location.
Interested List:
1.
2.
3.
4.
Paid List:
1. REDZMAN - redzmang @ rdtiburon.com - CF - Middle or end of Nov. - Paid $100 allready.
2. Ericy321 - Ericy321@aol.com - CF - 2 weeks probably - Paid 165 already
3.
4.
#2
Senior Member
Join Date: Mar 2006
Posts: 7,799
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon
Might not be a bad idea to allow a few more maybe because I think we can get 5. maybe lower the prce jsut a little bit to if we can get more? Jsut an idea. Im interested for sure
#3
Senior Member
Thread Starter
Join Date: Jul 2004
Location: Eau Claire, WI
Posts: 5,155
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 97 Tib
3 people is all we need to get production STARTED on any of these body products, the only one that's successfully been done (and its taken months, despite the 30 million people who SAID they were interested) is the EVO hood for RD1s.
The first 3 people get $100 off the retail FlyRyde.com price, and after that Chris has broke even with the cost it takes him to make it, so from that point forward they can be produced anytime and be ready whenever someone wants one.
The first 3 people get $100 off the retail FlyRyde.com price, and after that Chris has broke even with the cost it takes him to make it, so from that point forward they can be produced anytime and be ready whenever someone wants one.
#5
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Chris, hit me up on IM, I need to talk to you about this one.
Also, if it's not flared, it's no big deal. Just make sure you use a hood spacer kit.
BEST thing about this hood is that the scoop points right at your IM.
Also, if it's not flared, it's no big deal. Just make sure you use a hood spacer kit.
BEST thing about this hood is that the scoop points right at your IM.
#6
http://www.hyundaiaftermarket.org/images/vendor1.png
Join Date: Dec 2002
Posts: 3,237
Likes: 0
Received 0 Likes
on
0 Posts
I really dont know about the flare guys. If you want, I'll see how much more it'd cost me to include that in my hoods, but once I do it, theres not really any going back, as I'll use that on all my hoods. So let me know fellas. REDZ I'm at school. I can try chat?
#7
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
I dunno. The flare sounds nice, but I dunno.
What do you think chris?
Yeah, let's try the chat. Going in now.
What do you think chris?
Yeah, let's try the chat. Going in now.
#9
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Read the thread mang. S/H isn't known yet, but should be less than $150 easily. I'd say 80 to 120 for shipping.
They will be made after we get 4 folks paid in full. I should be paid in full mid November.
A flare on the hood is where the hood meets the cowling, it angles up to let hot air out of the engine bay.
They will be made after we get 4 folks paid in full. I should be paid in full mid November.
A flare on the hood is where the hood meets the cowling, it angles up to let hot air out of the engine bay.