Just bought a few items from kspec and once i received my clear corners for an RD1 i went to install them but the plug-in on the back of them is to small. Did they send me the wrong year or what? Here's a pic of the back of them.

 

Just switch the whole connector out from your original corners.

 

thats the bulb man, it comes out. dont really know why they sent you one with bulbs in it already, but you should be fine if you use the stockers.

 

Ive had a set from SR and a set from KSpec and both came with the bulbs in with the korean plugs. Easy fix

 

twist out the stock holders and replace the Kspec ones. you'll be fine.

 

those bulbs (at least in the 01 clear corners) are different too. guess it's just another of the many differences between US tibs and korean.

 

ya thats what i figured too, ptobably the korean plug is different, cause when my RD2 clear's came in they had a different plug in the back too, just take out the one thats in the clear corner and put your stock one in there, works fine, its just a different plug

 

Yea i figured that it was one of those diff from US & Korean tibs. But anyways thanks guys, going to install them right now. fing02.gif