Update On Damage/build
#1
Senior Member
Thread Starter
Join Date: Jun 2006
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1998 Hyundai Tiburon FX
In an earlier post I showed everyone my 6 bent valves and damaged pistons. So I decided I would do a little buildup while the car was out of commision.
1. wire tuck smile.gif (finished)
2. SR 4-2-1 header
3. MBRP 2.25" exhaust w/ high flow cat
4. 1.8l pistons
5. Stainless nuts and bolts throughout
6. 2 oil separators
7. Phenolic Spacers
8. New vacuum hoses
9. Samcoe rad hoses
10. Port IM
11. Jspeed crank pulley (maybe)
12. And of course, a new head w/ XD intake cam
I'll try to take pics of the wire tuck harness for everyone today.
1. wire tuck smile.gif (finished)
2. SR 4-2-1 header
3. MBRP 2.25" exhaust w/ high flow cat
4. 1.8l pistons
5. Stainless nuts and bolts throughout
6. 2 oil separators
7. Phenolic Spacers
8. New vacuum hoses
9. Samcoe rad hoses
10. Port IM
11. Jspeed crank pulley (maybe)
12. And of course, a new head w/ XD intake cam
I'll try to take pics of the wire tuck harness for everyone today.