Well all the parts of my exhaust are in and i am going to put it on Thursday. I was wondering how much you should torque down the bolts on the headers and the other exhaust components that have flanges. Also if there are any other installation tidbits i would appreciate it.

Thanks
JD

 

Hello---anyone.. Oh and one other question. If i where to get the A/F gauge which o2 sensor should it go off of(1st or 2nd) and which wire(color) should it tap into.

Thanks

 

The torque settings are listed on www.hmaservice.com

For the 02 sensor, you should hook it up to the first one. In regards to which wire, hyundai changes wire color all the time, so I cannot say what colors yours are. I reccomend you check them all with the engine running with a volt meter, and look for the wire that jumps between 0 and 1 V.