Follow Along W/ My Auto To Manual Swap!
#63
Super Moderator
Thread Starter
Whoa whoa, hold on there sparky!
There ARE short and long bolts. The short ones go through the flexplate on an automatic. The long ones go through the flywheel on a standard. They are NOT interchangeable!
There ARE short and long bolts. The short ones go through the flexplate on an automatic. The long ones go through the flywheel on a standard. They are NOT interchangeable!
#64
Senior Member
Join Date: Sep 2008
Location: Tampa,Fl
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon
Well I knew that as well but I've heard of their being 2 bolt sizes in the 5spd as well. But if the part numbers are all the same then I must of heard wrong lol.
#67
Super Moderator
Thread Starter
Reuse flywheel bolts if they came off your donor in good condition. If they were that high-failure of a part, HMA would have made a bigger deal about getting new ones every time the flywheel is replaced/resurfaced. Reuse head bolts too, according to Hyundai.
Unless you are going to super-high power levels, in which case get the best hardware you can buy.
Unless you are going to super-high power levels, in which case get the best hardware you can buy.