cruise control on BBTB
Thread Starter
Senior Member
Joined: Jul 2001
Posts: 260
Likes: 0
cruise control on BBTB
ok, i am haveing problems with keeping the cruise control cable to stay on the barney BBTB.
when i hit the gas it likes to pop right off,
is there any tricks to keeping the damn cruise
control cable on there, it doesn't really fit right
in the slot for it on BBTB?
Thanks,
when i hit the gas it likes to pop right off,
is there any tricks to keeping the damn cruise
control cable on there, it doesn't really fit right
in the slot for it on BBTB?
Thanks,
Guest
Posts: n/a
Use the search I posted a review on the barney a few days ago.
heres the thread. ... http://www.teamsr.org/cgi-bin/ultimatebb.c...c;f=16;t=001892
heres the thread. ... http://www.teamsr.org/cgi-bin/ultimatebb.c...c;f=16;t=001892
Senior Member
Joined: May 2001
Posts: 1,494
Likes: 0
I did a quick fix, I used a zip tie to pull the cruis control armature a little towards the front of the car, so that it wouldn't pop off. Smooth now. smile.gif But you might want to grind it better to make it fit. I'll probably do that when I install the BIM.
