Engine, Intake, Exhaust Modifications to your Normally Aspirated Hyundai engine. Cold Air Intakes, Spark Plugs/wires, Cat back Exhaust...etc.

coolant overflow

Old Mar 21, 2014 | 01:39 AM
  #1  
fronkkillsit's Avatar
Thread Starter
Member
 
Joined: Jun 2013
Posts: 44
Likes: 0
From: pa
Vehicle: 2000 tiburon
Default coolant overflow

So, this may or may not be a dumb question but can i move the overflow? I'm doing the civic half core mod to make room for a bigger turbo. Since i deleted the a/c i was thinking about mounting the reservoir where the condenser used to sit. Would this caus3 any problems?
Reply
Old Mar 21, 2014 | 02:14 AM
  #2  
Tibbi's Avatar
Senior Member
 
Joined: Mar 2008
Posts: 4,185
Likes: 0
From: Atlanta, GA
Vehicle: MC + RD2 + AW11 + 944 = 4x Win
Default

It's pretty much just a tank, you can mount it anywhere so long as it doesn't restrict the radiator's air source. Going with a half core myself I'n a little worried about cutting off any more air feed to the overall surface area of the heat exchanger. Though plenty of people have run FMICs in front of the half core, so even then I doubt you'd do much damage unless you put a huge reservoir right in front of the radiator. Just get an empty monster can and some hose, mount that to the side
Reply
Old Mar 21, 2014 | 09:48 AM
  #3  
fronkkillsit's Avatar
Thread Starter
Member
 
Joined: Jun 2013
Posts: 44
Likes: 0
From: pa
Vehicle: 2000 tiburon
Default

Haha thanks! I plan on just moving the stock reservoir. I like the clean loooks it gives without it anyways.
Reply
Old Mar 21, 2014 | 09:26 PM
  #4  
Tibbi's Avatar
Senior Member
 
Joined: Mar 2008
Posts: 4,185
Likes: 0
From: Atlanta, GA
Vehicle: MC + RD2 + AW11 + 944 = 4x Win
Default



I'm just









Actually it's pretty tempting to use one of these:

Reply
Old Mar 22, 2014 | 02:17 PM
  #5  
Brandon's Avatar
http://www.hyundaiaftermarket.org/images/vendor1.png
 
Joined: Jun 2011
Posts: 198
Likes: 0
From: NJ
Vehicle: Hyundai Genesis 2.0T
Default

^ I assume that's just a temporary thing?
Reply



All times are GMT -6. The time now is 02:16 AM.