Clutches
Senior Member
Joined: Mar 2006
Posts: 4,244
Likes: 0
From: Ashland, KY
Vehicle: 2001/Hyundai/Tiburon
^^ really? napa's around here are always the nicest parts stores around. They stay open because they are designed to be used by garages. Nearly anything not in stock is available the next day. They deliver. Usually have a machine shop (thats where I got flywheel resurfaced last time).
anyways on the clutch. One word. ACT.
If you have any plans of big upgrades in the future the push clutch setup from denis might be another option. Still have to buy a clutch though.
anyways on the clutch. One word. ACT.
If you have any plans of big upgrades in the future the push clutch setup from denis might be another option. Still have to buy a clutch though.
Member
Joined: Jan 2005
Posts: 98
Likes: 0
From: Lexington, SC
NAPA usually have little hole in the wall stores and then big stores. I had to drive to their big store once to get a 10' exhaust section.
+1 on ACT clutches I have had my 6puc unsprung and hd pressure plate both on the fidanza and now on my stock flywheel. It is still going 60,000miles on it. I do miss the light weight flywheel. Shifting is so much quicker with it.
+1 on ACT clutches I have had my 6puc unsprung and hd pressure plate both on the fidanza and now on my stock flywheel. It is still going 60,000miles on it. I do miss the light weight flywheel. Shifting is so much quicker with it.
Senior Member
Joined: Jan 2010
Posts: 308
Likes: 0
Vehicle: 2000 Hyundai Tiburon
i vote ACT.
i use to have a gripfroce stage 3 off ebay, it didn't last very long. now i have the sprung 6 puck from ACT and I'll never use anything else. it's strong and durable enough to take a beating and still great in traffic. go ACT, you won't regret it.
i use to have a gripfroce stage 3 off ebay, it didn't last very long. now i have the sprung 6 puck from ACT and I'll never use anything else. it's strong and durable enough to take a beating and still great in traffic. go ACT, you won't regret it.
Senior Member
Joined: Mar 2006
Posts: 7,799
Likes: 0
Vehicle: 2001 Hyundai Tiburon
Napa machining is alright. Ive seen motors though with a taper in every cylinder. My shop uses them for almost everything and we never have to wait to long at all. Just wanted to throw that in.
Senior Member
Joined: Jan 2008
Posts: 245
Likes: 0
From: Hamburg PA
another one here for ACT. I do like the 6 puc sprung but it was annoying to rev up my engine a little higher. But boy did that clutch grab. I'm just going to buy the ACT street disc now for a smoother engagement. My tranny just blew up about a week ago thats why I decided to buy the street disc right away. I also have the fidanza lightweight flywheel and love it.
Thread Starter
Senior Member
Joined: Sep 2006
Posts: 1,419
Likes: 0
From: WI
Vehicle: 06 suby impreza outback sport
well, the spec clutch came in today n it's pretty. still waiting on an anus to freaking ship the flywheel, which i dont think is going to happen(superbee)!!!!!!