Car Stalling After 30 Minutes Of Normal Driving.
Moderator
Joined: Feb 2009
Posts: 11,732
Likes: 5
From: Leesville, Louisiana
Vehicle: 2001 Hyundai Tiburon
QUOTE (daneeboy83 @ Dec 3 2008, 02:21 PM)
I did change this DTN. Thanks for your post though.
The reason I asked was becaue I've received improperly gapped plugs in a stock box from advanced before.
Yes, the PCV system can cause bogging.
Thread Starter
Senior Member
Joined: Jan 2008
Posts: 218
Likes: 0
From: South Africa
Hey guys
Thanks Alot for all the help.
I replaced potentiometer and Map Sensor.
Now my car is fine. Besides a little bearing knock when drived for a while.
I think it might be because the conrod and crank bearings were not cut.
But i will write another post.
Anyways everyone i really appreciate your help!!
Can you please close this topic.
Thanks Again!!!
Thanks Alot for all the help.
I replaced potentiometer and Map Sensor.
Now my car is fine. Besides a little bearing knock when drived for a while.
I think it might be because the conrod and crank bearings were not cut.
But i will write another post.
Anyways everyone i really appreciate your help!!
Can you please close this topic.
Thanks Again!!!
