blow-off valve Q.
Thread Starter
Member
Joined: Aug 2001
Posts: 54
Likes: 0
blow-off valve Q.
Hey guys, I have a question about where to run the pipeing from a blow off valve on my Alpine Turbo setup. I'm using a Gready blow-off valve and it shows how to recirculate the pipes. However, will I recirculate back before the mass air, after the mass air, or directly in to the intake? Also, did anyone have any problems with hooking up the Oil Pressure gauge with the kit. My mecanics said that there is something wrong and will have to be at a later time. I can't remember the exact reason, he talked to me after I had several beers 
Thanks for your help! HondaEater 
Thanks for your help! HondaEater
Super Moderator
Joined: May 2001
Posts: 11,851
Likes: 2
From: Rancho Palos Verdes, CA
Vehicle: 2008 Toyota Prius 2006 Suzuki SV650S
The BOV should route to AFTER the MAF but before the Turbo.
As far as the oil pressure gauge goes, depends on which one you bought.
As far as the oil pressure gauge goes, depends on which one you bought.
