Engine, Intake, Exhaust Modifications to your Normally Aspirated Hyundai engine. Cold Air Intakes, Spark Plugs/wires, Cat back Exhaust...etc.

Auto To Manual Swap

Thread Tools
 
Old 02-01-2006, 08:33 PM
  #1  
Member
Thread Starter
 
OneBadtib97's Avatar
 
Join Date: Feb 2005
Location: Roanoke/Salem Virginia
Posts: 94
Likes: 0
Received 0 Likes on 0 Posts
Default

Hey fellas i have a RD1 Tib and i was wounder how hard would it be to do a auto to manual swap, and what all would i need besides the shifter, shifter cables, clutch pedal, and the transmission itslef??? my brother said it would be easy to do, but i don't wanna rely on his word, so if theres anybody out there who has done it that could feel me in that would be great thanks




Josh
Old 02-01-2006, 08:33 PM
  #2  
Member
Thread Starter
 
OneBadtib97's Avatar
 
Join Date: Feb 2005
Location: Roanoke/Salem Virginia
Posts: 94
Likes: 0
Received 0 Likes on 0 Posts
Default

Hey fellas i have a RD1 Tib and i was wounder how hard would it be to do a auto to manual swap, and what all would i need besides the shifter, shifter cables, clutch pedal, and the transmission itslef??? my brother said it would be easy to do, but i don't wanna rely on his word, so if theres anybody out there who has done it that could feel me in that would be great thanks




Josh
Old 02-01-2006, 08:41 PM
  #3  
Senior Member
 
REDZMAN's Avatar
 
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes on 0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Default

Please, no one else answer this.

I'm not being mean, so don't think I am brother, but please go do a search.
Old 02-01-2006, 08:41 PM
  #4  
Senior Member
 
REDZMAN's Avatar
 
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes on 0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Default

Please, no one else answer this.

I'm not being mean, so don't think I am brother, but please go do a search.
Old 02-01-2006, 08:44 PM
  #5  
Member
Thread Starter
 
OneBadtib97's Avatar
 
Join Date: Feb 2005
Location: Roanoke/Salem Virginia
Posts: 94
Likes: 0
Received 0 Likes on 0 Posts
Default

Sorry Redz
Old 02-01-2006, 08:44 PM
  #6  
Member
Thread Starter
 
OneBadtib97's Avatar
 
Join Date: Feb 2005
Location: Roanoke/Salem Virginia
Posts: 94
Likes: 0
Received 0 Likes on 0 Posts
Default

Sorry Redz
Old 02-01-2006, 08:46 PM
  #7  
Senior Member
 
Sparticus's Avatar
 
Join Date: Mar 2006
Location: Mass
Posts: 6,341
Likes: 0
Received 0 Likes on 0 Posts
Vehicle: 97 Tiburon
Default

i honestly just did...

unfortunately, everything that comes up is "do a search"

and, i did find the DIY ( here ) but a lot of the pictures are missing...

we need to back up all of our DIY's. i'm gonna PM loneshark to see if he can get those images back up
Old 02-01-2006, 08:46 PM
  #8  
Senior Member
 
Sparticus's Avatar
 
Join Date: Mar 2006
Location: Mass
Posts: 6,341
Likes: 0
Received 0 Likes on 0 Posts
Vehicle: 97 Tiburon
Default

i honestly just did...

unfortunately, everything that comes up is "do a search"

and, i did find the DIY ( here ) but a lot of the pictures are missing...

we need to back up all of our DIY's. i'm gonna PM loneshark to see if he can get those images back up
Old 02-01-2006, 08:53 PM
  #9  
Member
Thread Starter
 
OneBadtib97's Avatar
 
Join Date: Feb 2005
Location: Roanoke/Salem Virginia
Posts: 94
Likes: 0
Received 0 Likes on 0 Posts
Default

im pretty sure i can do the swap easily, ive taken my auto tranny out twice now one for replacing the rear clutch, and the secound time for rebuilding it, i just need to know what i will need, and if theres anything i need to worry about when doing it.
Old 02-01-2006, 08:53 PM
  #10  
Member
Thread Starter
 
OneBadtib97's Avatar
 
Join Date: Feb 2005
Location: Roanoke/Salem Virginia
Posts: 94
Likes: 0
Received 0 Likes on 0 Posts
Default

im pretty sure i can do the swap easily, ive taken my auto tranny out twice now one for replacing the rear clutch, and the secound time for rebuilding it, i just need to know what i will need, and if theres anything i need to worry about when doing it.



All times are GMT -6. The time now is 01:35 PM.