5spd Swap Done - Car Won't Start - Need Help
01-13-2007, 02:38 PM
#1
Administrator
Thread Starter
Join Date: Oct 2002
Location: ɯooɹpǝq ɹnoʎ
Posts: 13,943
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: ǝdnoɔ sısǝuǝƃ
The 5spd swap is complete.
Problem 1: Car won't start. Plenty of power, it just won't turn. I rewired Pin 86 on the ECU to a constant 12V power source. The 7 & 8 pins on the transaxle switch plug are rewired. The starter has been checked. Any ideas?
Problem 2: Reverse lights come on when key is inserted and turned to ON position.
Problem 3: Brake lights aren't working.
Alex, Viper, Shadohh, JAWS, Blacktibs, anyone who's done this swap, please PM me with your phone #. I need help with this!! Any ideas?
-----------
Car just started. Somehow the circular plugs were never connected (I think it possibly goes to the starter). Took us two hours to figure out it was just a plug we missed.
Gonna fix the reverse lights real fast and take it out for a spin!!!!!!!!!!!!
w00h00!
Problem 1: Car won't start. Plenty of power, it just won't turn. I rewired Pin 86 on the ECU to a constant 12V power source. The 7 & 8 pins on the transaxle switch plug are rewired. The starter has been checked. Any ideas?
Problem 2: Reverse lights come on when key is inserted and turned to ON position.
Problem 3: Brake lights aren't working.
Alex, Viper, Shadohh, JAWS, Blacktibs, anyone who's done this swap, please PM me with your phone #. I need help with this!! Any ideas?
-----------
Car just started. Somehow the circular plugs were never connected (I think it possibly goes to the starter). Took us two hours to figure out it was just a plug we missed.
Gonna fix the reverse lights real fast and take it out for a spin!!!!!!!!!!!!
w00h00!
01-13-2007, 07:19 PM
#8
Senior Member
Join Date: Aug 2009
Location: Washington D.C.
Posts: 11,992
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Hyundai Tiburon FX
who would have ever thought all three of us would be getting something like this done all at the same time--and with tiburons at that. laugh.gif