Can anyone get these pictures back uploaded, I'm looking to do this swap myself soon. Or possibly another write-up without it relating to pictures if there aren't any. If I have to get the RD2 wiring harness for the main dash I'll do that but if its possible without to much hassle then I'll do some splicing. All I have right now is the RD2 dash complete, including all the switches and the RD1 1997 tiburon base model wiring harness. Looking for some help is all, and from what I've read through on here and another forum a couple people are looking to do this conversion or are just trying to wing it. I rather not just wing it when it comes to electronics in the car. Thanks for the look.

 

I call it a cause beyond hope, but I have put in a call for the site Staff to see if the pictures can be resurrected. I peeked at the original post and the links to the pictures are not only broken links, they aren't even links anymore. If nobody has a copy saved, this may be a good chance for you all to be super-helpful to your fellow Hyundai owners/enthusiasts and take new pictures.

 

Thanks stocker, I know it will be greatly appreciated by a lot of people. I'm getting a RD2 harness now so least I won't have to do a ton of splicing. I'm hoping to get working on this in the next week or two. I'm hoping it will be pretty easy since I'll have the harness.

 

you --> <-- your car

 

I'll do my best to take pictures as I go.

 

here's the diagrams for rear defogger and pin swaps instructions. use the not used pins to identify the orientation of the plug.



Defog

RD 1 RD2

pin1 pin2

pin4 pin6

pin6 pin4

pin5 pin1

pin2 pin3

pin3 (not used) pin5 (not used)





Ill add the rest as i find them. also so if anyone is having trouble this can be a fall back