DIY Post all Hyundai DIY Guides here. You may also want to read some of our Hyundai Tutorials. Members who follow these guides do so at their own risks.

Belt squealing

Old Dec 23, 2010 | 04:56 AM
  #1  
Tony Vendetta's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2007
Posts: 303
Likes: 0
From: Inglewood, CA 90302
Default Belt squealing

Hello am living here in so cali and the rain has made driving my tib a nightmare. Water has been getting into my belts recently and as I didnt install my belts, How do I remove my belts so I can check em.
Reply
Old Dec 23, 2010 | 09:03 AM
  #2  
daytonmvp23's Avatar
Senior Member
 
Joined: Aug 2010
Posts: 201
Likes: 0
Vehicle: 2001/Hyundai/Tiburon
Default

You don't need to remove the belts to check them really. Just look down at them and check to see if they are fraying or cracked. If you remove them just replace them and make sure you clean each pulley as the old rubber tends to make the new belts squeek and not grip the pulley as well.
Reply
Old Jan 13, 2011 | 04:19 PM
  #3  
xxsobesxx's Avatar
Member
 
Joined: Mar 2010
Posts: 68
Likes: 0
From: Pittsburgh
Vehicle: 1998 Hyundai Tiburon
Default

I have the same problem, but mine squeel when its cold. I tightened them and used some belt spray to reduce the sound. It still does it sometimes, but does anyone know how to make them stop squeeling completely? Also they are old, not sure how old though. They have no signs of cracks or bad wear.
Reply
Old Jan 13, 2011 | 07:27 PM
  #4  
WytchDctr's Avatar
Super Moderator
 
Joined: Dec 2001
Posts: 1,792
Likes: 0
From: Houston, Texas
Vehicle: 14 EGT 2.0
Default

Mine became a PITA to stop once I installed the UDP. I get it close and spray a shot of WD40 on them in cold weather. It works, lol
Reply
Old Jan 13, 2011 | 08:11 PM
  #5  
Stocker's Avatar
Super Moderator
 
Joined: Sep 2001
Posts: 10,795
Likes: 5
From: Pflugerville, TX
Vehicle: 2000 Elantra
Default

New, properly sized belts should not squeal. If your belts are >5 years old, they may look okay but they are on their way out.
Reply
Old Jan 14, 2011 | 10:54 PM
  #6  
xxsobesxx's Avatar
Member
 
Joined: Mar 2010
Posts: 68
Likes: 0
From: Pittsburgh
Vehicle: 1998 Hyundai Tiburon
Default

Darn, thats probably my case :-/ Well I need them to last me a year and a half more until I have to sell my baby :-/
Reply
Old Jan 15, 2011 | 12:27 AM
  #7  
Turboron_99's Avatar
Senior Member
 
Joined: Feb 2010
Posts: 1,468
Likes: 0
From: Kent, Wa
Vehicle: 13 Gen Coupe Ult.
Default

A not so easy way, but better than lubing your belts... lol which arent suppose to be lubed.. Is to take some 600 grit sand paper, and just sand down the pulley when replacing belts.
Reply
Old Jan 15, 2011 | 09:03 AM
  #8  
Stocker's Avatar
Super Moderator
 
Joined: Sep 2001
Posts: 10,795
Likes: 5
From: Pflugerville, TX
Vehicle: 2000 Elantra
Default

If you don't mind occasionally being stranded on the side of the road with a dead (possibly requiring $$$$ repair) engine, feel free to leave your belts as long as you like, just keep sanding them and spraying with belt dressing . . .
Reply
Old Jan 15, 2011 | 10:05 AM
  #9  
Turboron_99's Avatar
Senior Member
 
Joined: Feb 2010
Posts: 1,468
Likes: 0
From: Kent, Wa
Vehicle: 13 Gen Coupe Ult.
Default

I obviously said when replacin.... Not to fix sqealing...
Reply
Old Jan 15, 2011 | 01:32 PM
  #10  
Stocker's Avatar
Super Moderator
 
Joined: Sep 2001
Posts: 10,795
Likes: 5
From: Pflugerville, TX
Vehicle: 2000 Elantra
Default

the one time I don't quote the post . . .



I was responding to the post above yours. And thanks for the reminder, I need to replace an alternator belt and I had forgotten I ought to sand the pulley.



Edit:



With my newfound SUPERMod powers I corrected the title of this post.



Squill:

1. Any of several bulbous Eurasian and African plants of the genus Scilla, having narrow leaves and bell-shaped blue, white, or pink flowers.

2. See sea onion.

3. The dried inner scales of the bulbs of any of these plants, used as rat poison and formerly as a cardiac stimulant, expectorant, and diuretic.
Reply


All times are GMT -6. The time now is 08:22 AM.