Replacing Spindle (knuckle)
Thread Starter
Junior Member
Joined: Sep 2005
Posts: 18
Likes: 0
From: Barrie, Ontario
Beautiful... accidentally broke the front left spindle yesterday while trying to tap off the rusted rotor. I'm assuming that it's the spindle - the part that the caliper holder bolts to (with 17 mm bolts) just behind the dust covers.
Can anyone provide info or a link on how to replace the spindle. Looks like the hub needs to come off but I'm not 100%.
TIA.
Can anyone provide info or a link on how to replace the spindle. Looks like the hub needs to come off but I'm not 100%.
TIA.
Moderator
Joined: Feb 2009
Posts: 11,732
Likes: 5
From: Leesville, Louisiana
Vehicle: 2001 Hyundai Tiburon
http://www.rdtiburon.com/index.php?showtop...&hl=bearing
i think this is what you're looking for. it might be possible to repace just the part that the caliper bolts to, but I think its an assembly.
i think this is what you're looking for. it might be possible to repace just the part that the caliper bolts to, but I think its an assembly.
Senior Member
Joined: Apr 2008
Posts: 2,087
Likes: 0
From: Western PA
Vehicle: 2001 Tiburon
Do a search for how to replace a wheel bearing. It will have all the information you need to take your knuckle off to get it replaced. there is a DYI in the DYI section.
http://www.rdtiburon.com/index.php?showtop...ing+replacement
(forgot to hit post button before i made breakfast, Then DTN posted. Not meant to be a double post)
http://www.rdtiburon.com/index.php?showtop...ing+replacement
(forgot to hit post button before i made breakfast, Then DTN posted. Not meant to be a double post)
