Automotive News & Other Vehicle Discussions A forum for discussions pertaining to other vehicles other than Hyundai's, Press Releases, new model lauches and general Automotive news.

400-hp quad-turbo BMW diesels just around the corner?

Old Aug 4, 2015 | 04:41 PM
  #1  
blackgls's Avatar
Thread Starter
Member
 
Joined: Jan 2003
Posts: 94
Likes: 0
From: Cedar Rapids
Vehicle: 2001 Elantra GLS
Default 400-hp quad-turbo BMW diesels just around the corner?

http://autoweek.com/article/car-news...-around-corner



NEW 7-SERIES REPORTEDLY WILL RECEIVE QUAD-TURBO 3.0-LITER INLINE-SIX DIESEL



Tri-turbos are sooo last season. Aiming to keep up with fashion BMW is reportedly working on quad-turbo engines, according to Autocar.



The Munich-based automaker already fielded a tri-turbo design in the X5 xDrive50d M Performance and the M550d, adding an electrically driven turbocharger for extra low-end boost pressure. The quad-turbo design could follow that with another electrically driven turbo, or BMW could opt to go the conventional route and simply add a second bi-turbo setup to the diesel inline-six.



The quad-turbo inline-six diesel engine is expected to debut in the M750d 7-series sedan in 2016, and it could also make a cameo appearance in the xDrive50d M Performance versions of the X5 and the X6 in the near term.



Just how much power is the quad-turbo 3.0-liter diesel unit expected to pump out? Autocar says we could see more than 400 hp and 590 lb-ft of torque. That'll be well north of the 255 hp and 413 lb-ft of torque that the outgoing 740Ld xDrive model -- the first diesel 7-series sold in the States -- produced when it arrived for the last model year of the F01-generation, whose run ended this year. That said, it remains to be seen whether the quad-turbo diesel will make it across the pond.



The 2016 BMW 7-series was revealed in June of this year, and is expected to go on sale in the U.S. by the end of 2015. The U.S. will receive just the long-wheelbase versions of the 740i and the 750i xDrive models, with the former using a 320-hp, 3.0-liter turbocharged straight six and the latter powered by a 4.4-liter twin-turbo V8 good for 445 hp and 480 lb-ft





Seems a little overboard. Couldnt you achieve the same power with a more efficient single or twin turbo?
Reply
Old Aug 4, 2015 | 07:56 PM
  #2  
Stocker's Avatar
Super Moderator
 
Joined: Sep 2001
Posts: 10,795
Likes: 5
From: Pflugerville, TX
Vehicle: 2000 Elantra
Default

When you're buying a BMW 7-series, it's no longer strictly about what you "could" do.
Reply
Old Aug 5, 2015 | 09:39 AM
  #3  
Tibbi's Avatar
Senior Member
 
Joined: Mar 2008
Posts: 4,185
Likes: 0
From: Atlanta, GA
Vehicle: MC + RD2 + AW11 + 944 = 4x Win
Default

Quad turbo inline six? It must be basically a pair of sequential turbos. That's really the only way that makes sense. At what point is it not more cost effective to implement a KERS style electric to spool the turbos to 100k at all times so the spool to 150k is still solely achieved by the motor under stress.
Reply



All times are GMT -6. The time now is 10:27 PM.