Recirculating or Vented BOV
Thread Starter
Senior Member
Joined: Nov 2001
Posts: 198
Likes: 0
From: Seattle, WA
Vehicle: 2003 Turbo Tib
Recirculating or Vented BOV
Those of you who are boosted, are you using a vented BOV or going the recirculated route? I have mine vented to the atmosphere (HKS Sequential BOV)
Super Moderator
Joined: Mar 2006
Posts: 1,304
Likes: 0
From: ABQ, NM
Vehicle: 2001 hyundai tiburon
if you run the MAF after the BOV, you will be fine with running an atmospheric setup.
radu, yellowtib2001 and 01tiburon on my forums ar/were all running their setups that way without any issues.
setup would look like either of these.
radu, yellowtib2001 and 01tiburon on my forums ar/were all running their setups that way without any issues.
setup would look like either of these.
http://www.hyundaiaftermarket.org/images/vendor1.png
Joined: Jul 2008
Posts: 211
Likes: 0
From: Brisbane, Australia
Vehicle: 2003 Hyundai Accent 22PSI Boost
Mine is a plumb back setup, however i can remove the joiner and put the blank plate in and run it atmo... Dont know overseas, but herei n Australia, it is illegal to have an atmo BOV or a screamer Atmo External wastegate setup
Cheers Ryan
Cheers Ryan
Thread Starter
Senior Member
Joined: Nov 2001
Posts: 198
Likes: 0
From: Seattle, WA
Vehicle: 2003 Turbo Tib
QUOTE (turbosocks @ Mar 11 2010, 11:47 PM)
if you run the MAF after the BOV, you will be fine with running an atmospheric setup.
Thats how I have mine smile.gif
Administrator
Joined: Mar 2006
Posts: 12,515
Likes: 2
From: Lacey, WA
Vehicle: Two Accents, Mini, Miata, Van, Outback, and a ZX-6